User's Manual

omconfig: Managing Components Using the Instrumentation Service 129

NOTE: Minimum and maximum warning threshold values for the voltage cannot be

set on PowerEdge x8xx systems.

omconfig preferences

Use the omconfig preferences command to set system preferences. Use the

command line to set the SNMP root password and specify the user levels able

to access Server Administrator. You can also configure the Active Directory

service and SNMP set operations.

omconfig preferences cdvformat

Use the omconfig preferences cdvformat to specify the delimiters for

separating data fields reported in the custom delimited format. The valid

values for delimiters are: exclamation, semicolon, at, hash, dollar, percent,

caret, asterisk, tilde, question, colon, comma, and pipe.

The following example shows how to set the delimiter for separating data

fields to asterisk:

omconfig preferences cdvformat delimiter=asterisk

omconfig preferences dirservice

Use the omconfig preferences dirservice command to configure the Active

Directory service. The <productname>oem.ini file is modified to reflect

these changes. If the "adproductname" is not present in the

default value is used. <computername> refers to the name of the computer

running Server Administrator and <productname> refers to the name of the

product defined in omprv32.ini. For Server Administrator, the product name

is "omsa".

Therefore, for a computer named "myOmsa" running Server Administrator,

the default name would be "myOmsa–omsa". This is the name of Server

Administrator defined in Active Directory by using the snap–in tool. This

name must match the name for the application object in Active Directory in

order to find user privileges.

NOTE: This command is applicable only on systems running the Windows

operating system.

Table 4-16 shows the valid parameters for the command.