User's Manual

omconfig: Managing Components Using the Instrumentation Service 143
omconfig system events/omconfig servermodule events
Use the omconfig system events or omconfig servermodule events command
to enable and disable SNMP traps for the components on your system.
NOTE: Not all event types may be present on your system.
There are four parameters in the name=value pair component of the
omconfig system events command:
•Source
•Type
•Severity
•Index
Source
At present, source=snmptraps is a required name=value pair because
SNMP is currently the only supported source of event notification for your
system’s components.
event=
removableflashmediapresent
Sets actions that Server Administrator performs when
the system detects a removable flash media.
event=
removableflashmediaremoved
Sets actions that Server Administrator performs when a
removable flash media is removed.
event=
removableflashmediafail
Sets actions that Server Administrator performs when a
removable flash media fails.
event=tempfail Sets action or enables/disables alert generation when a
temperature probe detects that the temperature is
either too high or low for proper operation.
event=voltfail Sets action or enables/disables alert generation when a
voltage probe detects that the voltage is too low for
proper operation.
event=watchdogasr Enables or disables alert generation configured by the
ASR when the system has hung or is not responding.
Table 4-25. omconfig system platformevents (continued)
Event Name Description