User's Manual

Using the Storage Management Service 205
omconfig Start Patrol Read
Use the following omconfig command syntax to start the patrol read task on
the controller.
Complete Syntax
omconfig storage controller action=startpatrolread
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To start the patrol read task on controller 1, type:
omconfig storage controller action=startpatrolread
controller=1
NOTE: To be able to start patrol read, the current patrol read mode should be set to
Manual.
omconfig Stop Patrol Read
Use the following omconfig command syntax to stop the patrol read task on
the controller.
Complete Syntax
omconfig storage controller action=stoppatrolread
controller=id
where id is the controller ID as reported by the omreport storage controller
command.
Example Syntax
To stop the patrol read task on controller 1, type:
omconfig storage controller action=stoppatrolread
controller=1
NOTE: To be able to stop patrol read, the current patrol read mode should be set to
Manual.