Users Guide

104 Working with Remote Access Controller
8 Click Go Back to Platform Events Page to go back to the Platform Event
Filters
window.
Setting Platform Event Alert Destinations
You can also use the Platform Event Filters window to select a destination
where an alert for a platform event is to be sent. Depending on the number of
destinations that are displayed, you can configure a separate IP address for
each destination address. A platform event alert is sent to each destination
IP address that you configure.
1
Click Configure Destinations in the Platform Event Filters window.
The
Configure Destinations window displays a number of destinations.
2 Click the number of the destination you want to configure.
NOTE: The number of destinations that you can configure on a given system
may vary.
3 Select the Enable Destination check-box.
4 Click Destination Number to enter an individual IP address for that
destination. This IP address is the IP address to which the platform event
alert is sent.
5 Enter a value in the Community String field to act as a password to
authenticate messages sent between a management station and a managed
system. The community string (also called the community name) is sent
in every packet between the management station and a managed system.
6 Click Apply Changes .
7 Click Go Back to Platform Events Page to go back to the Platform Event
Filters
window.
book.book Page 104 Tuesday, March 6, 2012 6:13 PM