Users Guide

112 Setting Alert Actions
To allow interaction with the desktop:
1
Right-click the DSM SA Data Manager service in the Services control
panel and select Properties .
2 In the Log On tab, select Allow service to interact with desktop and click
OK .
3 Restart the DSM SA Data Manager service for the change to take effect.
4 Ensure that the Interactive Services Detection service is running.
When the DSM SA Data Manager service is restarted with this change, the
Service Control Manager logs the following message to the System log:
The DSM SA Data Manager service is marked as an
interactive service. Enabling the Interactive
Services Detection service allows the DSM SA Data
Manager service to execute interactive applications
properly for an Alert Action.
Once these changes are made, the Interactive services dialog detection dialog
box is displayed by the operating system to provide access to the interactive
application interface/prompt.
BMC/iDRAC Platform Events Filter Alert
Messages
The following table lists all possible Platform Event Filter (PEF) messages
along with a description of each event.
Table 7-1. PEF Alert Events
Event Description
Fan Probe Failure The fan is running too slow or not at all.
Voltage Probe Failure The voltage is too low for proper operation.
Battery Probe Warning The battery is operating below the recommended charge
level.
Battery Probe Failure The battery has failed.
Discrete Voltage Probe
Failure
The voltage is too low for proper operation.
book.book Page 112 Tuesday, March 6, 2012 6:13 PM