Users Guide
98 Working with Remote Access Controller
– IP Address Source
–IP Address
–Subnet Mask
– Gateway Address
– Channel Privilege Level Limit
– New Encryption Key (This option is available on Dell PowerEdge
x9xx
systems.)
5
Configure the following optional VLAN configuration details:
NOTE: VLAN configuration is not applicable for systems with iDRAC
– Enable VLAN ID
–VLAN ID
–Priority
6
Configure the following IPv4 Properties:
– IP Address Source
–IP Address
–Subnet Mask
– Gateway Address
7
Configure the following IPv6 Properties:
– IP Address Source
–IP Address
–Prefix Length
–Default Gateway
– DNS Address Source
– Preferred DNS Server
– Alternate DNS Server
NOTE: You can configure the IPv4 and IPv6 address details only if you enable
the IPv4 and IPv6 properties under Additional Configuration.
8
Click
Apply Changes.
book.book Page 98 Tuesday, March 6, 2012 6:13 PM