Command Line Interface Guide

omconfig: Managing Components Using the Instrumentation Service 101
attribute=dualnic setting=off | on |
pxeboth | nic1pxe
|nic2pxe | isciboth |
nic1isci | nic2isci |
nic1pxenic2isci |
nic1iscinic2pxe |
onpxeboth |
onpxenone |
onpxenic1 | onpxenic2
off: Disables the Network Interface
Controllers
( NICs.)
on: Enables the network interface (PXE
or iSCSI is not enabled on either of the
NICs.)
pxeboth: Enables PXE on both NICs.
nic1pxe: Enables PXE on first NIC and
none (No PXE or iSCSI) on second NIC.
nic2pxe: Enables none (No PXE or
iSCSI) on first NIC and PXE on second
NIC.
isciboth: Enables iSCSI on both NICs.
nic1isci: Enables iSCSI on first NIC and
none (No PXE or iSCSI) on second NIC.
nic2isci: Enables none (No PXE or
iSCSI) on first NIC and iSCSI on
second NIC.
nic1pxenic2isci: Enables PXE on first
NIC and iSCSI on second NIC.
nic1iscinic2pxe: Enables iSCSI on first
NIC and PXE on second NIC.
NOTE: The following options are
deprecated:
onpxeboth: Enables PXE on both NICs.
onpxenone: PXE is not enabled on
either of the NICs.
onpxenic1: Enables PXE on NIC 1.
onpxenic2: Enables PXE on NIC 2.
attribute=
embhypvisor
setting=enabled |
disabled
enabled: Enables embedded hypervisor.
disabled: Disables embedded hypervisor.
Table 4-3. BIOS Setup Settings on systems prior to PowerEdge
yx2x systems
name=value pair 1
attribute=
name=value pair 2
setting=
Description