Command Line Interface Guide

114 omconfig: Managing Components Using the Instrumentation Service
Processor Settings
(continued)
attribute=Proc2NumCores setting=<integer>
attribute=Proc3Brand setting=<string>
attribute=Proc3Id setting=<string>
attribute=Proc3L2Cache setting=<string>
attribute=Proc3L3Cache setting=<string>
attribute=Proc3NumCores setting=<integer>
attribute=Proc4Brand setting=<string>
attribute=Proc4Id setting=<string>
attribute=Proc4L2Cache setting=<string>
attribute=Proc4L3Cache setting=<string>
attribute=Proc4NumCores setting=<integer>
attribute=Proc64bit setting=<string>
attribute=
ProcAdjCacheLine
setting=Enabled | Disabled
attribute=ProcBusSpeed setting=<string>
attribute=ProcCores setting=Single | All | Dual |
Quad | 1 | 2 | 4 | 6 | 8 | 10 | 12 |
14 | 16
attribute=ProcCoreSpeed setting=<string>
attribute=
ProcExecuteDisable
setting=Enabled | Disabled
attribute=
ProcHwPrefetcher
setting=Enabled | Disabled
attribute=
ProcVirtualization
setting=Enabled | Disabled
attribute=
QpiBandwidthPriority
setting=InputOutput | Compute
Table 4-4. BIOS Setup Settings on PowerEdge yx2x Systems
(continued)
Group name=value pair 1
attribute=
name=value pair 2
setting=