Command Line Interface Guide

omconfig system or servermodule assetinfo: Editing Cost of Ownership Values 179
Example Command for Adding Maintenance Information
To provide a value for a maintenance parameter, type a command of the form:
omconfig system assetinfo info=maintenance <name=value pair 2> or
omconfig system assetinfo info=maintenance <name=value pair 2>.
For example, type:
omconfig system assetinfo info=maintenance
startdate=012504
or
omconfig servermodule assetinfo info=maintenance
startdate=012504
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig
servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see "Example Commands for Adding Acquisition
Information" on page 173.
provider=
<provider>
Business entity
providing the
maintenance service.
startdate=
<startdate>
Date the maintenance
begins.
restrictions=
<string>
Activities not covered
by the maintenance
contract.
Table 5-6. omconfig system assetinfo info=maintenance or omconfig servermodule
assetinfo info=maintenance
(continued)
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value
Pair 2
Description