Command Line Interface Guide

18 Introduction
• Internal Tape Adapter (ITA) for LSI PCI-e U320 SCSI non-RAID
controllers.
• Device management for PCI Express Solid-State Drive (PCIe SSD.)
• Physical Disk Power Management for Configured Drives feature on the
PERC H710, PERC H710P, and PERC H810 controllers.
• As per the recommendation from Citrix, deprecated the web server
support, on Citrix XenServer 6.0 managed servers, for loading domain 0
(dom0) with resource constrained operations.
NOTE: For the supported operating systems list, see the Dell Systems Software
Support Matrix. To access this document, go to support.dell.com/manuals, click
Software, and select the product.
NOTE: CLI commands are not supported on systems with VMware ESXi operating
system.
Using CLI Commands From Windows
Command Prompts
If you are running the Microsoft Windows operating system, use the 32-bit
command prompt to issue a Server Administrator CLI command. Access the
32-bit command prompt using one of the following methods:
•Click Start  Programs  Accessories  Command Prompt
•Click Start  Run and type cmd.exe
NOTE: Do not type command into the Run dialog box to launch a command line
window; this activates the MS-DOS emulator command.com, which has
environment variable limitations that can cause subtle problems with CLI.