Command Line Interface Guide

202 omreport storage Commands
omreport Fan Status
Table 7-7 describes the syntax for the omreport Fan Commands.
Table 7-7. omreport Fan Status
Required Command Levels
(1, 2, 3) and name=value pair
Optional name=value pairs Use
omreport storage
enclosure
Displays property information
for all enclosures attached to
the system.
controller=id enclosure=
<ENCLOSUREID>
info=fans
where id is the controller
number and
ENCLOSUREID is the
enclosure number.
For example: controller=0
enclosure=2
NOTE: For SCSI controllers,
the ID specified in enclosure=
<ENCLOSUREID> is the
connector number and for
Serial Attached SCSI (SAS)
controllers, ID is the
connectorNumber:EnclosureIn
dex.
Displays the fans for the
specified enclosure.
controller=id enclosure=
<ENCLOSUREID>
info=fans index=n
where id is the controller
number and
ENCLOSUREID is the
enclosure number and “n” is
the number of a fan.
For example: controller=0
enclosure=2 info=fans
index=1
Displays the specified fan.