Command Line Interface Guide

96 omconfig: Managing Components Using the Instrumentation Service
omconfig chassis or omconfig mainsystem
Use the omconfig chassis or omconfig mainsystem commands to default or
to set values for fan, voltage, and temperature probes, to configure BIOS
behavior during system start up, to clear memory error counts, and to enable
or disable power button control features where system configuration permits.
Use the omconfig chassis -? or omconfig mainsystem -? command to view a
list of all omconfig chassis or omconfig mainsystem commands.
omconfig chassis biossetup or omconfig mainsystem biossetup
Use the omconfig chassis biossetup or omconfig mainsystem biossetup
command to configure system BIOS settings that are normally available only
in the BIOS setup boot time settings of the system.
CAUTION: Changing certain BIOS setup options might disable the system or
require you to reinstall the operating system.
NOTE: Reboot the system for the BIOS setup options take effect.
NOTE: Not all BIOS setup options are available on every system.
NOTE: Due to the limitations of certain operating systems (for example, VMware
ESXi), certain features are not available with this release of OpenManage Server
Administrator.