Installation manual

Installing Dell OpenManage Software on VMware ESXi 91
5 Enter the root username and password of the ESXi host when prompted.
The command output displays a successful or a failed update. In case of a
failed update, see "Troubleshooting."
6 Restart the ESXi host system.
When you run the command, the following components are installed on your
system:
• Server Administrator Instrumentation Service
• Remote Enablement
• Server Administrator Storage Management
• Remote Access Controller
You must install the Server Administrator Web Server separately on a
management station. For information on installing the Server Administrator
Web Server, see "Installing Managed System Software on Microsoft Windows
Operating Systems" and "Installing Managed System Software on Supported
Linux and VMware ESX."
After installing Server Administrator, you have to enable Server Administrator
Services. For information on enabling these services, see "Enabling Server
Administrator Services on the Managed System."
Enabling Server Administrator Services on the
Managed System
The Server Administrator Web Server communicates with the VMware ESXi
system through the Server Administrator Common Interface Model (CIM)
provider. The Server Administrator CIM provider is an Original equipment
manufacturer (OEM) provider on the VMware ESXi system. CIM OEM
providers are disabled by default on VMware ESXi 4.0 and ESXi 4.1. You
must enable the CIM OEM providers on the VMware ESXi system before
accessing it using Server Administrator Web Server.
NOTE: In ESXi 4.1 U2, ESXi 5.0 and ESXi 5.0 P1 Dell OpenManage CIM OEM provider
is enabled by default.