Read me

Limitation 7: DF 523827
Description: On Citrix XenServer 6.0, if the Alert on Console alert action is configured from the Server
Administrator CLI or GUI, the alert message may not be displayed in a readable format. (523827)
Limitation 8: DF 530134
Description: On VMware ESX 4.1 managed node, while USB arbitration service is running, Inventory
Collector does not respond while stopping the Server Administrator services.
Workaround: To resolve this issue, stop the USB arbitration service and run the Inventory Collector.
To stop the USB arbitration service:
1. Run the “ps aux|grep usb” command to check if the USB arbitration service is running.
2. Run the “chkconfig usbarbitrator off” command to prevent the USB arbitration service from
starting during boot.
3. After the USB arbitrator service is stopped, reboot the server to allow the Inventory collector to
run.
Limitation 9: DF 520449
Description: On all versions of the ESX, the following USB connection error messages are generated. These
messages can be ignored. The following shows a typical message:
Vendor: iDRAC Model: MAS022 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: iDRAC Model: SECUPD Rev: 0329
Type: Direct-Access ANSI SCSI revision: 02
Limitation 10: DF 531509
Description: The setup and/or system password configuration from Server Administrator GUI or CLI is
successful, but the password is displayed as blank instead of asterisk ‘*’ on the F2 BIOS page.
