Read me


Issue 4:
Description: After a "Reset to Defaults" operation of the Integrated Dell Remote Access Controller, the
first user configuration operation will fail if it is a single-user configuration item (such as enabling or
disabling a user or changing user name).
Resolution: Always change a combination of two-user configuration items (such as enabling or disabling a
user and changing user name) concurrently during your first configuration operation.
Issue 5:
Description: While browsing through IT Assistant, if the SNMP protocol is disabled and the CIM protocol is
enabled, the redundancy status is shown as "lost" even though the system has full redundancy.
Resolution: To confirm the correct state of the system, use the Server Administrator user interface.
Issue 6:
Description: The "Format or Split Mirror" operation may fail on a RAID 1 virtual disk on a CERC SATA
1.5/6ch controller. Dell is working towards resolving this issue.
Issue 7:
Description: While issuing the Server Administrator command line omreport system version -outc
<filename>, ensure that you specify an absolute path name for the output file, for example, c:\out.txt;
otherwise, the output file will be empty.
Issue 8:
Description: Issuing the omreport system esmlog/alertlog/cmdlog -fmt tbl command on the CLI can result
in XML parsing errors if the size of the log is very large. Use the GUI or the omreport system
esmlog/alertlog/cmdlog CLI command to view the contents of the log.
Issue 9:
Description: For complex omconfig CLI commands that contain multiple set commands in one command
line, the CLI may report a success status for the command even if a part of the command failed.
Resolution: To avoid this issue, run only one command per command line. The current settings can be
confirmed by performing the corresponding omreport command.
Issue 10:
Description: Some complex "omconfig" CLI commands that contain multiple set operations have been
modified to avoid the above problem.
Resolution: While executing a CLI command, if you receive the message "Error! Illegal combination of
parameters", modify your command into several simpler commands. Each command should change only
one setting.
Issue 11:
Description: When running Server Administrator on a system with a traditional Chinese operating system,
the application pages are displayed in simplified Chinese.
Resolution: To view the Server Administrator pages in English, go to your browser language preference
page and change the language to English.