Reference Guide

Introduction 15
Action requested
was: <Action>
Specifies the action that was requested, for example:
Action requested was: Reboot, shutdown
OS first
Additional Details:
<Additional details
for the event>
Specifies additional details available for the hot plug
event, for example:
Memory device: DIMM1_A Serial
number: FFFF30B1
<Additional power
supply status
information>
Specifies information pertaining to the event,
for example:
Power supply input AC is off, Power
supply
POK (power OK) signal is not normal,
Power supply is turned off
Chassis intrusion
state: <Intrusion
state>
Specifies whether the chassis intrusion state is Open or
Closed. For example:
Chassis intrusion state: Open
Chassis location:
<Name of chassis>
Specifies name of the chassis that generated the
message, for example:
Chassis location: Main System Chassis
Configuration error
type:
<type of
configuration
error>
Specifies the type of configuration error that occurred,
for example:
Configuration error type: Revision
mismatch
Current sensor
value (in Amps):
<Reading>
Specifies the current sensor value in amps, for example:
Current sensor value (in Amps): 7.853
Date and time of
action: <Date and
time>
Specifies the date and time the action was performed,
for example:
Date and time of action: Sat Jun 12
16:20:33 2004
Table 1-2. Event Description Reference
(continued)
Description Line Item Explanation