Reference Guide

Storage Management Message Reference 229
2399 The Physical
Disk Power
status changed
from 1% to 2%
OK / Normal /
Informational
Cause: The physical
disk power status is
changed from one state
to another. A physical
disk can have the
following power
statuses: spun down,
transition, and spun up.
Action: None
Clear Alert:
None
Related
Alert: None
LRA
Number:
None
901
2400 Physical disk
configuration
data updated
as it was stale.
Warning /
Non-critical
Cause: The physical
disk configuration data
is updated because it
was outdated.
Action: None
Clear Alert:
None
Related
Alert: None
LRA
Number:
None
901
2401 Configuration
command
could not be
committed to
disk.
Configuration
has to be re
applied.
Failure / Error Cause: The virtual disk
configuration command
did not succeed.
Action: Check for the
recent configuration
that has not taken
effect. Re-apply the
configuration.
Clear Alert:
None
Related
Alert: None
LRA
Number:
None
754
2402 Changing the
Physical Disk
Power status
from 1% to 2%
failed.
Failure / Error Cause: When changing
the Physical Disk Power
status fails.
Action: Replace the
physical disk.
Clear Alert:
None
Related
Alert: None
LRA
Number:
None
904
Table 3-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Related
Alert
Information
SNMP
Trap
Numbers