Reference Guide

System Event Log Messages for IPMI Systems 265
Memory device at location
<location> is overheating.
Critical This event is generated when
system memory reaches critical
temperature.
An OEM diagnostic event
occurred.
Information This event is generated when an
OEM event occurs. OEM events
can be used by Dell service team
to better understand the cause
of the failure.
CPU <number> protocol
error detected.
Critical This event is generated when
the processor protocol enters a
non-recoverable state.
CPU bus parity error
detected.
Critical This event is generated when
the processor bus PERR enters a
non-recoverable state.
CPU <number>
initialization error
detected.
Critical This event is generated when
the processor initialization
enters a non-recoverable state.
CPU <number> machine check
error detected.
Critical This event is generated when
the processor machine check
enters a non-recoverable state.
All event logging is
disabled.
Critical This event is generated when all
event logging is disabled.
Logging is disabled. Critical This event is generated when
the ECC single bit error rate is
exceeded.
The system board fail-safe
voltage is outside of
range.
Critical This event is generated when
the system board voltages are
not at normal levels.
The system board fail-safe
voltage is within range.
Information This event is generated when
earlier Fail-Safe system voltages
return to a normal level.
Table 4-12. BIOS Generated System Events
(continued)
Event Message Severity Cause