SNMP Reference Guide

24 Introduction
Dell Remote Access Controller Out-of-Band MIB
The Dell Remote Access Controller Out-of-Band MIB (filename
dellRAC.mib) provides management data that allows you to monitor the
Chassis Management Controller. This MIB also contains information on RAC
legacy alerting. Table 1-7 describes each Dell RAC Out-of-Band group and
lists the MIB group number assigned to the MIB group. See the relevant
section for more information about the MIB objects defined in a MIB group.
Table 1-7. Dell RAC Out-of-Band MIB
How This Guide Defines Technical Terms
The following table provides information about where to find definitions for
technical terms in this reference guide.
Section Topics MIB Group
Number
25 The Dell RAC Out-of-Band MIB consists of information for
the following groups:
• "Product Information" on page 689
• "Chassis Status" on page 693
• "Chassis Power" on page 703
• "CMC Power Information" on page 704
• "CMC PSU Information" on page 708
• "Chassis Alerts" on page 710
• "Legacy Alerting" on page 712
2
Table 1-8. Where to Find Definitions for Technical Terms
Type of Definition See
Basic SNMP vocabulary. "Introduction" on page 17
MIB-group-specific variable values.
MIB-group-specific MIB variables contain links to the
tables that define these values in the last section of
the section in which these variables are used.
Sections 3, 5, 7, 8, 9, and 11
through 18.
Systems management terms, acronyms, and
commonly managed components referred to in this
reference guide.
Glossary available on the Dell
Support website at
support.dell.com/manuals.
book.book Page 24 Tuesday, February 28, 2012 2:19 PM