SNMP Reference Guide

32 Introduction
Section Organization
Sections in this reference guide are based on the Server Administrator MIBs,
so the complexity of each section depends on the complexity of each MIB
group. The first section provides a high-level introduction to the MIB group.
If the group is defined by one or more tables, the second section lists these
tables. The third section documents the variables that comprise the group,
and if applicable, the variables that comprise the tables. The fourth section
contains definitions for any Server Administrator-specific variables that are
used in the section. The following example shows the typical content of these
four sections:
1
BIOS Setup Control Group
This section explains the purpose of the MIB group and summarizes the
major features of the component groups.
2 BIOS Group Tables
If there is more than one SNMP table for a group, this section lists all of
the tables. For this BIOS group example, there are eight tables listed.
In each section, double-clicking any table on the list takes you to that table.
• BIOS Setup Control Table
•SCSI Control Table
• Parallel Port Control Table
• Serial Port Control Table
• USB Control Table
• IDE Control Table
• Diskette Control Table
• Network Interface Control Table
3 Variables that make up each table in the group
This section documents the variables for the eight tables that comprise the
BIOS group.
book.book Page 32 Tuesday, February 28, 2012 2:19 PM