SNMP Reference Guide

Device Group 347
Table 14-28. SD Card Device Config Settings
Table 14-29. SD Card Device Card State
Table 14-30. SD Card Device Card Licensed
Variable Name: DellSDCardDeviceConfigSettings
Data Type: Integer
NOTE:
These values are bit fields, so combination values are possible.
Possible Data Values Meaning of Data Value
none(0) SD card device has none of the following
settings.
sdEnabled(1) SD media is enabled.
vFlashEnabled(2) Virtual Flash (vFlash) is enabled.
Variable Name: DellSDCardDeviceCardState
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0) SD card state is none of the following states.
present(1) Device is present.
ipmiReady(2) Device is IPMI ready.
fullReady(4) Device is full ready.
offline(8) Device is offline.
failed(16) Device is failed.
active(32) Device is active.
bootable(64) Device is bootable.
writeProtect(128) Device is write-protected.
standby(256) Device is in standby mode.
Variable Name: DellSDCardDeviceCardLicensed
Data Type: Integer
Possible Data Values Meaning of Data Value
unlicensed(0) SD card is not licensed by system vendor.
book.book Page 347 Tuesday, February 28, 2012 2:19 PM