SNMP Reference Guide

516 Remote Access Group
Table 20-11. Remote Access Out-Of-Band Simple Network Management Protocol
(SNMP) Settings
Variable Name:
DellRemoteAccessOutOfBandSNMPSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0) The remote access hardware has no out-of-band
SNMP settings.
unknown(1) The remote access hardware out-of-band SNMP
settings are unknown.
oobSNMPAgentEnabled(2) The remote access hardware out-of-band SNMP
agent is enabled.
oobSNMPTrapsEnabled(4) The remote access hardware sends out-of-band
SNMP traps.
Table 20-12. Remote User Admin State Capabilities
Variable Name:
DellRemoteUserAdminStateCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0) The admin user has no state capabilities.
unknownCapabilities(1) The admin user state capabilities are unknown.
enableCapable(2) The admin user can be disabled or enabled.
notReadyCapable(4) The admin user can be in the not ready state.
numericPagerCapable(8) The admin user supports numeric paging.
alphaPagerCapable(16) The admin user supports alphanumeric paging.
emailCapable(32) The admin user supports e-mail.
privilegeCapable(64) The admin user supports user privileges
configuration.
book.book Page 516 Tuesday, February 28, 2012 2:19 PM