User's Manual

100 Controllers
Patrol Read State This property displays the current state of the Patrol Read
process. Possible values are:
Ready—The Patrol Read process is enabled and runs when
next scheduled or when manually initiated.
Active—The Patrol Read process is currently running.
Stopped—The Patrol Read has been stopped.
For more information about Patrol Read, see Set Patrol Read
Mode.
Patrol Read Rate This property represents the percentage of the system
resources dedicated for running the patrol read operation. It
changes the amount of system resources assigned for the
Patrol Read task. The patrol read rate can be configured
between 0% and 100%, where:
• 0% — indicates the lowest priority for controllers and has the
least impact on the system performance.
• 100% — indicates the highest priority for controllers and has
a greater impact on the system performance.
Patrol Read
Iterations
This property displays the number of Patrol Read iterations.
For more information about Patrol Read, see Set Patrol Read
Mode.
Cluster Mode This property indicates whether the controller is part of a
cluster configuration.
SCSI Initiator ID This property displays the SCSI ID of a SCSI controller. The
default value is usually 7. You can change the default value in
the BIOS. In cluster mode, the value is 6 or 7.
The SCSI ID is not displayed on the PERC 4/IM controllers.
Use the BIOS on these controllers to identify the SCSI ID.
Property Definition