User's Manual

160 Enclosures and Backplanes
The Failure threshold indicates that the enclosure has reached a dangerous
temperature that may cause damage and data loss. You cannot change the
default values for the Failure threshold.
To change the temperature probe’s Warning threshold:
1 The enclosure’s temperature probes are listed in the Temperature Probes
section of the screen. Select the probes that you want to change.
2 Select Set new values in the Set New Temperature Probe Values section
of the screen.
3 Type the lowest acceptable temperature in Celsius for the enclosure in the
Minimum Warning Threshold text box. The text box label indicates the
range that you can specify.
4 Type the highest acceptable temperature in Celsius for the enclosure in
the
Maximum Warning Threshold text box. The text box label indicates
the range that you can specify.
5 Click Apply Changes .
If you want to return the temperature probe’s Warning threshold to the
default values, select the Reset to default values button and click Apply
Changes. The default values are displayed in the Minimum Warning
Threshold and Maximum Warning Threshold text boxes.
NOTE: On some enclosures, Storage Management may experience a short delay
before displaying the current enclosure temperature and temperature probe status.
For more information, see Storage Management May Delay Before Updating
Temperature Probe Status.
To locate this task in Storage Management:
1 Expand the Storage tree object to display the controller objects.
2 Expand a controller object.
3 Expand a Connector object.
4 Select the enclosure object.
5 Select the Information/Configuration subtab.
6 Select Set Temperature Probe Values from the Available Tasks drop-
down menu.
7 Click Execute .