User's Manual

80 Storage Information and Global Tasks
Storage Components
For information on attached controllers, see the following topics:
• Controller Properties and Tasks
• Controllers
SCSI Initiator ID This property displays the SCSI ID of a SCSI controller.
The default value is usually 7. You can change the default
value in the BIOS. Controllers in a cluster configuration
should not have duplicate SCSI Initiator IDs. Refer to
SCSI documentation for a list of acceptable SCSI Initiator
ID values.
On some controllers, this property is not available. In this
case, this property displays as Not Applicable.
Property Definition