Reference Guide

Table 122. omconfig Cachecade Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
cachecade
action=blink controller=id cachecade=id
action=unblink controller=id cachecade=id
action=deletecachecade controller=id cachecade=id [force=yes]
action=resize controller=id cachecade=id pdisk= <PDISKID>
action=rename controller=id cachecade=id name=<string>
Omconfig Blink Cachecade
Description Blinks the physical disks included in a cachecade.
Syntax
omconfig storage cachecade action=blink controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported by the
omreport command. To obtain these values, type omreport storage controller
to display the controller IDs and then type omreport storage cachecade
controller=ID to display the IDs for the cachecades of the controller.
Example to Blinks the physical disk in cachecade 4 on controller 1
Example
omconfig storage cachecade action=blink controller=1
cachecade=4
Omconfig Unblink Cachecade
Description Unblinks the physical disks included in a cachecade.
Syntax
omconfig storage cachecade action=unblink controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported by the
omreport command. To obtain these values, type omreport storage controller
to display the controller IDs and then type omreport storage cachecade
controller=ID to display the IDs for the cachecades of the controller.
Example to Unblinks the physical disk in cachecade 4 on controller 1
Example
omconfig storage cachecade action=unblink controller=1
cachecade=4
Omconfig Delete Cachecade
Description Deletes a cachecade.
Syntax
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id, where id is the controller ID and the cachecade
ID as reported by the omreport command. To obtain these values, type omreport
storage controller
to display the controller IDs and then type omreport
storage cachecade controller=ID to display the IDs for the cachecades of the
controller.
In some circumstances, you may receive a warning message. You can override this
warning by using the force=yes parameter. In this case, the syntax is as follows:
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id force=yes
172