Reference Guide

name=value pair 1 name=value pair 2 Description

NOTE: These options are

applicable only when a custom

profile is selected.

fanmode=min | max

min: Sets the fanmode to minimum

power utilization.

max: Sets the fanmode to maximum

power utilization.

NOTE: These options are

applicable only when a custom

profile is selected.

NOTE: Reboot the system for the power profiles setup options to take effect.

Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring

Use the omconfig chassis pwrmonitoring or omconfig mainsystem pwrmonitoring command to configure power

consumption information.

The following table displays the valid parameters for the command:

Table 29. Valid Parameters Of Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring

name=value pair 1 name=value pair 2 Description

index=<

> NA Number of the probe or probe index

(must specify).

config=probe warnthresh=settodefault Sets the minimum and maximum

warning thresholds values to default.

warnthresh=<

> Sets a value for the warning

threshold.

unit=watt | btuphr

watt: Displays the unit in Watts.

btuphr: Displays the unit in BTU/hr.

config=resetreading type=energy | peakpower

energy: Resets the system energy

reading.

peakpower: Resets the system peak

power.

NOTE: This command is applicable only on selected Dell 10G systems that support PMBus.

NOTE: Power monitoring requires license to configure the power budget information. If the appropriate license is

not installed or has expired, the system displays an error message. For more information, see

Dell License

Manager

at dell.com/openmanagemanuals.

Default Warning Thresholds

NOTE: Sensor managing capabilities vary across systems.

To set both the upper and lower power consumption probe warning threshold values to the recommended default value,

type:

omconfig chassis pwrmonitoring config=probe index=0 warnthresh=settodefault