SNMP Reference Guide
amperageProbeTypeIsOther(1) 
The amperage probe type is not one of the following:
amperageProbeTypeIsUnknown(2) 
The amperage probe type is unknown (not known or not 
monitored).
amperageProbeTypeIs1Point5Volt(3)
The amperage probe type is a 1.5-ampere (A) probe.
amperageProbeTypeIs3Point3volt(4) 
The amperage probe type is a 3.3-A probe.
amperageProbeTypeIs5Volt(5)
The amperage probe type is a 5-A probe.
amperageProbeTypeIsMinus5Volt(6) 
The amperage probe type is a –5-A probe.
amperageProbeTypeIs12Volt(7) 
The amperage probe type is a 12-A probe.
amperageProbeTypeIsMinus12Volt(8) 
The amperage probe type is a –12-A probe.
amperageProbeTypeIsIO(9) 
The amperage probe type is an I/O amperage probe.
amperageProbeTypeIsCore(10) 
The amperage probe type is a core amperage probe.
amperageProbeTypeIsFLEA(11) 
The amperage probe type is a FLEA (standby) amperage 
probe.
amperageProbeTypeIsBattery(12) 
The amperage probe type is a battery amperage probe.
amperageProbeTypeIsTerminator(13) 
The amperage probe type is a Small Computer System 
Interface (SCSI) termination amperage probe.
amperageProbeTypeIs2Point5Volt(14) 
The amperage probe type is a 2.5-V amperage probe.
amperageProbeTypeIsGTL(15) 
The amperage probe type is a Gunning Transceiver Logic 
(GTL) probe.
amperageProbeTypeIsDiscrete(16) 
The amperage probe type is an amperage probe with 
discrete reading.
amperageProbeTypeIsPowerSupplyAmps(23) 
The amperage probe type is power supply probe with 
reading in Amperes.
amperageProbeTypeIsPowerSupplyWatts 
(24) 
The amperage probe type is power supply probe with 
reading in Watts.
amperageProbeTypeIsSystemAmps(25) 
The amperage probe type is system probe with reading in 
Amperes.
amperageProbeTypeIsSystemWatts(26) 
The amperage probe type is system probe with reading in 
Watts.
Table 416. Amperage Probe Discrete Reading
Variable Name: DellAmperageDiscreteReading 
Data Type: Integer
Possible Data Values  Meaning of Data Value 
amperageIsGood(1) 
The amperage probe discrete reading is good.
amperageIsBad(2) 
The amperage probe discrete reading is bad.
134










