Users Guide

NOTE: You can set minimum and maximum temperature probe threshold values for an external
chassis to whole numbers only. If you attempt to set either the minimum or maximum temperature
probe threshold value to a number that contains a decimal, only the whole number before the
decimal place is saved as the threshold setting.
Voltages
Click the Voltages object to manage voltage levels in your system. Server Administrator monitors
voltages across critical components in various chassis locations in the monitored system. The Voltages
object action window can have the following tabs, depending on the user's group privileges: Properties
and Alert Management.
Properties
Subtab: Voltage Probes
Under the Properties tab, you can view the current readings and status of your system's voltage probes
and configure minimum and maximum values for voltage probe warning threshold.
NOTE: Some voltage probe fields differ according to the type of firmware your system has, such as
BMC or ESM. Some threshold values are not editable on BMC-based systems.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View the current alert actions settings and set the alert actions that you want to be performed in the
event that a system voltage sensor returns a warning or failure value.
• View the current SNMP trap alert thresholds and set the alert threshold levels for voltage sensors. The
selected traps are triggered if the system generates a corresponding event at the selected severity
level.
Software
Click the Software object to view detailed version information about the managed system's essential
software components, such as the operating system and the systems management software. The
Software object action window has the following tab, depending on the user's group privileges:
Properties.
Subtab: Summary
Properties
Under the Properties tab, you can view a summary of the monitored system's operating system and
system management software.
Operating System
Click the Operating System object to view basic information about your operating system. The Operating
System object action window has the following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view basic information about your operating system.
Storage
Server Administrator provides the Storage Management Service:
The Storage Management Service provides features for configuring storage devices. In most cases, the
Storage Management Service is installed using Typical Setup. The Storage Management Service is
59