Release Notes

Administrator reports the two platform event filters related to power monitoring as
"System Power Probe Warning" and "System Power Probe Failure". These two filters are
not supported on these systems. That is, you can view and configure these filters, but no
action is taken.
• DF185770: Primary User Telephone Number does not accept symbols. On Server
Administrator, under Asset Information->System Information->Primary User Telephone
Number configuration allows only alphanumeric characters.
• The selection of default option for front panel LCD in Server Administrator displays the
Model Name whereas the default is Service Tag on the physical LCD.
• In case Server Administrator does not respond or is locked to your selections on the
component tree, perform the following steps:
1. Click “Preferences”. The Preferences page appears.
2. Click “Server Administrator”. The items on the front page may respond to your click.
• DF277439: Persistence of Configuration and Log File Changes in VMware ESXi On systems
running the VMware ESXi operating system, the file system is ramdisk. Modifications made
to the files within the file system are generally not persistent across reboots, with the
exception of designated configuration and log files. These files are updated to the disk
periodically and on system shutdown. If the system is reset without a graceful shutdown
before the updated to the designated configuration are made and before log files are
updated to the disk, the changes are lost.
The following is an example of the effect of this behavior:
o On certain systems, the first time that the thresholds for a probe are changed
after Server Administrator is installed; the current threshold values for that
probe are saved as the default threshold values by writing the values to a
configuration file. When "Set to Default" is performed after the first change of
the thresholds, Server Administrator sets the threshold values to the values
that were saved in the configuration file as the default. If the system running
the VMware ESXi operating system is reset without a graceful shutdown
before the changes to the configuration file are updated to the disk, the user-
defined thresholds become the default thresholds.
• DF315853: Some Server Administrator CLI commands functions properly only when run
from the elevated console window. It is recommended that you use the elevated console
for running the CLI.
• Due to some limitations, you cannot log on simultaneously to multiple browser
instances/tabs using SSO login, as only one session remains active while the other
sessions expire.
• DF489034: Intel TXT configuration fails due to Virtualization technology dependency
• If the current Virtualization Technology attribute setting is "Disabled" (Virtualization
Technology is part of the Processor Settings group on the BIOS setup page); the Intel TXT
attribute configuration fails on the Server Administrator user interface (System -> Main
System Chassis -> BIOS -> Setup ->System Security.) To resolve this issue, configure
Virtualization technology setting to "Enabled" and reconfigure the Intel TXT attribute, if it is
configurable.
• DF549057: When an operating system is installed through USC, the BIOS attributes in
Server Administrator are displayed as read-only. You can edit the BIOS attributes 18 hours
after the operating system installation.
Workaround: To enable editing of the Server Administrator BIOS attributes, launch
Lifecycle Controller while booting.
• DF552204: On Mozilla Firefox browsers (versions 10, 11 and 12), Server Administrator fails
to launch if IPv6 address is used.
This is a known issue. For more information, see
https://bugzilla.mozilla.org/show_bug.cgi?id=633001.