Administrator Guide

ManualsBrandsDell ManualsMotherboardsOpenManage Server Administrator Version 7.4

Server Administrator

Version 7.4 Messages Reference Guide

Summary of content (232 pages)

PAGE 1
Server Administrator Version 7.
PAGE 2
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
PAGE 3
Contents 1 Introduction..............................................................................................................17 What’s New in this Release..................................................................................................................17 Alert Message Change History............................................................................................................ 17 Messages Not Described in This Guide.........................................................
PAGE 4
Event ID — 1053.............................................................................................................................31 Event ID — 1054............................................................................................................................ 32 Event ID — 1055............................................................................................................................ 32 Cooling Device Messages............................................................
PAGE 5
Event ID — 1400............................................................................................................................44 Event ID — 1401............................................................................................................................ 44 Event ID — 1402............................................................................................................................44 Event ID — 1403......................................................................
PAGE 6
Event ID — 2005............................................................................................................................54 3 Storage Management Message Reference.......................................................55 Alert Monitoring and Logging.............................................................................................................55 Alert Message Format with Substitution Variables.............................................................................
PAGE 7
Event ID — 2092............................................................................................................................ 71 Event ID — 2094............................................................................................................................ 71 Event ID — 2095............................................................................................................................ 71 Event ID — 2098....................................................................
PAGE 8
Event ID — 2141.............................................................................................................................87 Event ID — 2142............................................................................................................................ 88 Event ID — 2143............................................................................................................................ 88 Event ID — 2144....................................................................
PAGE 9
Event ID — 2183.......................................................................................................................... 102 Event ID — 2184.......................................................................................................................... 102 Event ID — 2185.......................................................................................................................... 103 Event ID — 2186.......................................................................
PAGE 10
Event ID — 2227........................................................................................................................... 117 Event ID — 2228...........................................................................................................................117 Event ID — 2229...........................................................................................................................117 Event ID — 2230......................................................................
PAGE 11
Event ID — 2270...........................................................................................................................131 Event ID — 2271........................................................................................................................... 131 Event ID — 2272.......................................................................................................................... 132 Event ID — 2273......................................................................
PAGE 12
Event ID — 2314.......................................................................................................................... 146 Event Id — 2315........................................................................................................................... 146 Event ID — 2316...........................................................................................................................147 Event ID — 2318......................................................................
PAGE 13
Event ID — 2358.......................................................................................................................... 162 Event ID — 2359.......................................................................................................................... 162 Event ID — 2360..........................................................................................................................162 Event ID — 2361........................................................................
PAGE 14
Event ID — 2403.......................................................................................................................... 176 Event ID — 2404..........................................................................................................................176 Event ID — 2405.......................................................................................................................... 177 Event ID — 2407........................................................................
PAGE 15
Event ID — 2902..........................................................................................................................190 Event ID — 2903.......................................................................................................................... 191 Event ID — 2904.......................................................................................................................... 191 Event ID — 2905........................................................................
PAGE 16
Operating System Generated System Events.................................................................................. 226 Cable Interconnect Events............................................................................................................... 226 Battery Events....................................................................................................................................227 Power And Performance Events..................................................................
PAGE 17
1 Introduction Dell OpenManage Server Administrator generates event messages stored primarily in the operating system or Server Administrator event logs and sometimes in Simple Network Management Protocol (SNMP) traps. This document describes the event messages that are created by Server Administrator version 7.1.2 and displayed in the Server Administrator alert log. Server Administrator creates events in response to sensor status changes and other monitored parameters.
PAGE 18
2909, 2910, 2911, 2912, 2913, 2914, 2915, 2916, 2917, 2918, 2919, 2920, 2921, 2922, 2923, 2924, 2930, 2931, 2932, 2933 Deleted Alerts None Modified Alerts None Storage Management 4.2 Product Versions to which changes apply Storage Management 4.2.0 Server Administrator 7.2.0 New Alerts 2433, 2434, 2435, 2436, 2437, 2438 Deleted Alerts None Modified Alerts 2359 Storage Management 4.1 Product Versions to which changes apply Storage Management 4.1.0 Server Administrator 7.1.
PAGE 19
Modified Alerts None Storage Management 3.3 Product Versions to which changes apply Storage Management 3.3.0 Server Administrator 6.3.0 New Alerts 2394, 2395, 2396, 2397, 2398, 2399, 2400, 2401, 2402, 2403, 2404 Deleted Alerts None Modified Alerts Alert severity changed for 1151 and 1351 Storage Management 3.2 Product Versions to which changes apply Storage Management 3.2.0 Server Administrator 6.2.
PAGE 20
Icon Alert Severity Component Status temperature probe in an enclosure) has crossed a warning threshold. Critical / Failure / Error A significant event that indicates actual or imminent loss of data or loss of function. For example, crossing a failure threshold or a hardware failure such as an array disk.
PAGE 21
Data: Bytes in Hex Viewing Alerts and Event Messages An event log is used to record information about important events. Server Administrator generates alerts that are added to the operating system event log and to the Server Administrator alert log. To view these alerts in Server Administrator: 1. Select the System object in the tree view. 2. Select the Logs tab. 3. Select the Alert tab. You can also view the event log using your operating system’s event viewer.
PAGE 22
Viewing Events in Microsoft Windows Server 2008 1. Click the Start button, point to Settings, and click Control Panel. 2. Double-click Administrative Tools, and then double-click Event Viewer. 3. In the Event Viewer window, click the Tree tab and then click System Log. The System Log window displays a list of recently logged events. 4. To view the details of an event, double-click one of the event items. NOTE: You can also look up the dcsys .xml file, in the \omsa\log directory, to
PAGE 23
• Time — The local time the event occurred. • Type — A classification of the event severity: Information, Warning, or Error. • User — The name of the user on whose behalf the event occurred. • Computer — The name of the system where the event occurred. • Source — The software that logged the event. • Category — The classification of the event by the event source. • Event ID — The number identifying the particular event type. • Description — A description of the event.
PAGE 24
Explanation Specifies the type of configuration error that occurred, for example: Configuration error type: Revision mismatch Description Line Item Current sensor value (in Amps): Explanation Specifies the current sensor value in amps, for example: Current sensor value (in Amps): 7.
PAGE 25
Explanation Specifies the name of the memory bank in the system that generated the message, for example: Memory device bank location: Bank_1 Description Line Item Memory device location: Explanation Specifies the location of the memory module in the chassis, for example: Memory device location: DIMM_A Description Line Item Number of devices required for full redundancy: Explanation Specifies the number of power supply or cooling devices required to achieve full red
PAGE 26
Description Line Item Redundancy unit: Explanation Specifies the location of the redundant power supply or cooling unit in the chassis, for example: Redundancy unit: Fan Enclosure Description Line Item SD card device type: Explanation Specifies the type of SD card device, for example: SD card device type: Hypervisor Description Line Item SD card state: Explanation Specifies the state of the SD card, for example: SD card
PAGE 27
Server Management Messages 2 The following tables lists in numerical order each event ID and its corresponding description, along with its severity and cause. NOTE: For corrective actions, see the appropriate documentation. Server Administrator General Messages The messages below indicate that certain alert systems are up and working. Event ID — 0000 Description Log was cleared Severity Information Cause User cleared the log from Server Administrator.
PAGE 28
Event ID — 1002 Description A system BIOS update has been scheduled for the next reboot Severity Information Cause The user has chosen to update the flash basic input/output system (BIOS). Event ID – 1003 Description A previously scheduled system BIOS update has been canceled Severity Information Cause The user decides to cancel the flash BIOS update, or an error occurs during the flash.
PAGE 29
Event ID — 1007 Description User initiated host system control action Action requested was: Severity Information Cause User requested a host system control action to reboot, power off, or power cycle the system. Alternatively, the user had indicated protective measures to be initiated in the event of a thermal shutdown. Event ID — 1008 Description Systems Management Data Manager Started Severity Information Cause Systems Management Data Manager services were started.
PAGE 30
Event ID — 1013 Description System Peak Power detected new peak value Peak value (in Watts): Severity Information Cause The system peak power sensor detected a new peak value in power consumption. The new peak value in Watts is provided.
PAGE 31
Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Error Cause A temperature sensor on the backplane board, system board, or the carrier in the specified system failed. The sensor location, chassis location, previous state, and temperature sensor value are provided.
PAGE 32
Previous state was: If sensor type is not discrete: Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Warning Cause A temperature sensor on the backplane board, system board, CPU, or drive carrier in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and temperature sensor value are provided.
PAGE 33
Cooling Device Messages The cooling device sensors listed monitor how well a fan is functioning. Cooling device messages provide status and warning information for fans in a particular chassis. Event ID — 1100 Description Fan sensor has failed Sensor location: Chassis location: Previous state was: Fan sensor value: Severity Error Cause A fan sensor in the specified system is not functioning.
PAGE 34
Chassis location: Previous state was: Fan sensor value: Severity Warning Cause A fan sensor reading in the specified system exceeded a warning threshold. The sensor location, chassis location, previous state, and fan sensor value information is provided.
PAGE 35
Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Error Cause A voltage sensor in the specified system failed. The sensor location, chassis location, previous state, and voltage sensor value information is provided.
PAGE 36
Previous state was: If sensor type is not discrete: Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A voltage sensor in the specified system exceeded its warning threshold. The sensor location, chassis location, previous state, and voltage sensor value information is provided.
PAGE 37
Current Sensor Messages The current sensors listed measure the amount of current (in amperes) that is traversing critical components. Current sensor messages provide status and warning information for current sensors in a particular chassis.
PAGE 38
Previous state was: If sensor type is not discrete: Current sensor value (in Amps): OR Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Information Cause A current sensor in the specified system returned to a valid range after crossing a failure threshold. The sensor location, chassis location, previous state, and current sensor value information is provided.
PAGE 39
Cause A current sensor in the specified system exceeded its failure threshold. The sensor location, chassis location, previous state, and current sensor value are provided.
PAGE 40
Chassis intrusion state: Severity Information Cause A chassis intrusion sensor in the specified system detected that a cover was opened while the system was operating but has since been replaced. The sensor location, chassis location, previous state, and chassis intrusion state information is provided.
PAGE 41
Event ID — 1301 Description Redundancy sensor value unknown Redundancy unit: Chassis location: Previous redundancy state was: Severity Warning Cause A redundancy sensor in the specified system could not obtain a reading. The redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy are provided.
PAGE 42
redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy information is provided. Event ID — 1305 Description Redundancy degraded Redundancy unit: Chassis location: Previous redundancy state was: Severity Warning Cause A redundancy sensor in the specified system detected that one of the components of the redundancy unit has failed but the unit is still redundant.
PAGE 43
Cause A power supply sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided.
PAGE 44
If in configuration error state: Configuration error type: Severity Error Cause A power supply has been disconnected or has failed. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided. Memory Device Messages The memory device messages listed provides status and warning information for memory modules present in a particular system.
PAGE 45
Cause Memory device status is normal. The memory device identified in the message has returned to a normal state. Event ID — 1403 Description Memory device status is Memory device location: Possible memory module event cause: Severity Warning Cause A memory device correction rate exceeded an acceptable value. The memory device status and possible memory module event cause information is provided.
PAGE 46
Event ID — 1550 Description Log monitoring has been disabled Log type: Severity Warning Cause A hardware log sensor in the specified system is disabled. The log type information is provided. Event ID — 1551 Description Log status is unknown Log type: Severity Information Cause A hardware log sensor in the specified system could not obtain a reading. The log type information is provided.
PAGE 47
Event ID — 1555 Description Log sensor has failed Log type: Severity Error Cause A hardware log sensor in the specified system failed. The hardware log status cannot be monitored. The log type information is provided. Processor Sensor Messages The processor sensors monitor how well a processor is functioning. Processor messages listed provides status and warning information for processors in a particular chassis.
PAGE 48
Previous state was: Processor sensor status: Severity Warning Cause A processor sensor in the specified system is in a throttled state. The sensor location, chassis location, previous state and processor sensor status information is provided.
PAGE 49
Cause A device was added in the specified system. The device location, chassis location, and additional event details, if available, are provided. Event ID — 1652 Description Device removed from system Device location: Chassis Location: Additional details: Severity Information Cause A device was removed from the specified system. The device location, chassis location, and additional event details, if available, are provided.
PAGE 50
Chassis Location: Previous state was: Battery sensor status: Severity Warning Cause A battery sensor in the specified system could not retrieve a reading. The sensor location, chassis location, previous state, and battery sensor status information is provided.
PAGE 51
Cause A battery sensor in the specified system detected that a battery has failed. The sensor location, chassis location, previous state, and battery sensor status information is provided. Event ID — 1705 Description Battery sensor detected a non-recoverable value Sensor location: Chassis Location: Previous state was: Battery sensor status: Severity Error Cause A battery sensor in the specified system could not retrieve a value.
PAGE 52
Severity Information Cause An SD card device sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device.
PAGE 53
Severity Error Cause An SD card device sensor in the specified system detected an error. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device.
PAGE 54
Event ID — 2003 Description CMC reported a warning. Severity Warning Cause CMC warning event, as described in the drsCAMessage variable supplied with the alert. Event ID — 2004 Description CMC reported a critical event. Severity Critical Cause CMC critical event, as described in the drsCAMessage variable binding supplied with the alert. Event ID — 2005 Description CMC reported a non-recoverable event.
PAGE 55
3 Storage Management Message Reference The Server Administrator Storage Management’s alert or event management features let you monitor the health of storage resources such as controllers, enclosures, physical disks, and virtual disks. Alert Monitoring and Logging The Storage Management Service performs alert monitoring and logging. By default, the Storage Management service starts when the managed system starts up. If you stop the Storage Management Service, then alert monitoring and logging stops.
PAGE 56
Table 3.
PAGE 57
Storage Object Message Variables where "C" is the SCSI ID number of the enclosure management module (EMM) managing the power supply.
PAGE 58
Event ID — 2048 Description Device failed. Severity Critical / Failure / Error Cause and Action Cause: A storage component such as a physical disk or an enclosure has failed. The failed component may have been identified by the controller while performing a task such as a rescan or a check consistency. Action: Replace the failed component. You can identify which disk has failed by locating the disk that has a red “X” for its status. Perform a rescan after replacing the failed component.
PAGE 59
Cause and Action Cause: A physical disk in the disk group is offline. The user may have manually put the physical disk offline. Action: Perform a rescan. You can also select the offline disk and perform a Make Online operation. Related Alert Information Clear Alert Number: 2158 Related Alert Number: 2099, 2196 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2051 Description Physical disk degraded.
PAGE 60
Event ID — 2053 Description Virtual disk created. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2054 Description Virtual disk deleted. Severity Informational Cause and Action Cause: A virtual disk has been deleted.
PAGE 61
Event ID — 2056 Description Virtual disk failed. Severity Critical / Failure / Error Cause and Action Cause: One or more physical disks included in the virtual disk have failed. If the virtual disk is non-redundant (does not use mirrored or parity data), then the failure of a single physical disk can cause the virtual disk to fail. If the virtual disk is redundant, then more physical disks have failed than can be rebuilt using mirrored or parity information.
PAGE 62
Event ID — 2058 Description Virtual disk check consistency started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2059 Description Virtual disk format started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 63
Event ID — 2061 Description Virtual disk initialization started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: 2088 Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2062 Description Physical disk initialization started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 64
Event ID — 2064 Description Virtual disk rebuild started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: 2091 Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2065 Description Physical disk rebuild started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 65
SNMP Trap Numbers 1201 Event ID — 2070 Description Virtual disk initialization cancelled. Severity OK / Normal / Informational Cause and Action Cause: The virtual disk initialization cancelled because a physical disk included in the virtual disk has failed or because a user cancelled the virtual disk initialization. Action: If a physical disk failed, then replace the physical disk. You can identify which disk has failed by locating the disk that has a red “X” for its status.
PAGE 66
SNMP Trap Numbers 1201 Event ID — 2076 Description Virtual disk Check Consistency failed. Severity Critical / Failure / Error Cause and Action Cause: AA physical disk included in the virtual disk failed or there is an error in the parity information. A failed physical disk can cause errors in parity information. Action: Replace the failed physical disk. You can identify which disk has failed by locating the disk that has a red “X” for its status. Rebuild the physical disk.
PAGE 67
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2080 Description Physical disk initialization failed. Severity Critical / Failure / Error Cause and Action Cause: The physical disk has failed or is not functioning. Related Alert Information Clear Alert Number: None Action: Replace the failed or non-functional disk.
PAGE 68
SNMP Trap Numbers 1204 Event ID — 2082 Description Virtual disk rebuild failed. Severity Critical / Failure / Error Cause and Action Cause: A physical disk included in the virtual disk has failed or is not functioning. A user may also have cancelled the rebuild. Action: Replace the failed or non-functional disk. You can identify a disk that has failed by locating the disk that has a red X for its status. Restart the virtual disk rebuild.
PAGE 69
Related Alert Information Clear Alert Number: Alert 2085 is a clear alert for alert 2058. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2086 Description Virtual disk format completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2086 is a clear alert for alert 2059.
PAGE 70
SNMP Trap Numbers 1201 Event ID — 2089 Description Physical disk initialization completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2089 is a clear alert for alert 2062.
PAGE 71
Event ID — 2092 Description Physical disk rebuild completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2092 is a clear alert for alert 2065. Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2094 Description Predictive Failure reported.
PAGE 72
Severity OK / Normal / Informational Cause and Action Cause: A SCSI device experienced an error, but may have recovered. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: 2273 Local Response Agent (LRA) Number: None SNMP Trap Numbers 751, 851, 901 Event ID — 2098 Description Global hot spare assigned. Severity OK / Normal / Informational Cause and Action Cause: A user has assigned a physical disk as a global hot spare.
PAGE 73
SNMP Trap Numbers 901 Event ID — 2100 Description Temperature exceeded the maximum warning threshold. Severity Warning / Non-critical Cause and Action Cause: The physical disk enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot. Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working.
PAGE 74
examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. See the physical disk enclosure documentation for more diagnostic information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 1054 Event ID — 2103 Description Temperature dropped below the minimum failure threshold.
PAGE 75
Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2105 is a clear alert for alert 2104. Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2106 Description SMART FPT exceeded.
PAGE 76
SNMP Trap Numbers 904 Event ID — 2108 Description SMART warning. Severity Warning / Non-critical Cause and Action Cause: A disk has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert. If the physical disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk.
PAGE 77
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2110 Description SMART warning degraded. Severity Warning / Non-critical Cause and Action Cause: A disk is degraded and has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert.
PAGE 78
Cause and Action Cause: The physical disk enclosure is either hotter or cooler than the maximum or minimum allowable temperature range. Action: Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot or too cold.
PAGE 79
Event ID — 2116 Description A virtual disk and its mirror have been split. Severity OK / Normal / Informational Cause and Action Cause: A user has caused a mirrored virtual disk to be split. When a virtual disk is mirrored, its data is copied to another virtual disk in order to maintain redundancy. After being split, both virtual disks retain a copy of the data although the mirror is no longer intact. The updates to the data are no longer copied to the mirror. This alert is for informational purposes.
PAGE 80
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2120 Description Enclosure firmware mismatch. Severity Warning / Non-critical Cause and Action Cause: The firmware on the EMM is not the same version. It is required that both modules have the same version of the firmware.
PAGE 81
Cause and Action Cause: One or more of the enclosure components has failed. For example, a fan or power supply may have failed. Although the enclosure is currently operational, the failure of additional components could cause the enclosure to fail. Action: Identify and replace the failed component. To identify the failed component, select the enclosure in the tree view and click the Health subtab. Any failed component is identified with a red X on the enclosure’s Health subtab.
PAGE 82
SNMP Trap Numbers 1053 Event ID — 2124 Description Redundancy normal. Severity OK / Normal / Informational Cause and Action Cause: Data redundancy has been restored to a virtual disk or an enclosure that previously suffered a loss of redundancy. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2124 is a clear alert for alerts 2122 and 2123.
PAGE 83
CAUTION: Removing a physical disk that is included in a non-redundant virtual disk causes the virtual disk to fail and may cause data loss. If the disk is part of a redundant virtual disk, then any data residing on the corrupt portion of the disk is reallocated elsewhere in the virtual disk. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2127 Description Background initialization (BGI) started.
PAGE 84
Cause and Action Cause: BGI of a virtual disk has failed. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: 2340 Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2130 Description BGI completed. Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has completed. This alert is for informational purposes. Related Alert Information Clear Alert Number: Alert 2130 is a clear alert for alert 2127.
PAGE 85
Cause and Action Cause: The controller driver is not a supported version. Related Alert Information Clear Alert Number: None Action: Install a supported version of the driver. If you do not have a supported driver version available, you can check with your support provider for information on how to obtain the most current driver. Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2135 Description Array Manager is installed on the system.
PAGE 86
Event ID — 2137 Description Communication time-out. Severity Warning / Non-critical Cause and Action Cause: The controller is unable to communicate with an enclosure. There are several reasons why communication may be lost. For example, there may be a bad or loose cable. An unusual amount of I/O may also interrupt communication with the enclosure. In addition, communication loss may be caused by software, hardware, or firmware problems, bad or failed power supplies, and enclosure shutdown.
PAGE 87
Event ID — 2139 Description Enclosure alarm disabled. Severity OK / Normal / Informational Cause and Action Cause: A user has disabled the enclosure alarm. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2140 Description Dead disk segments restored.
PAGE 88
Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2142 Description Controller rebuild rate has changed. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the controller rebuild rate. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2143 Description Controller alarm enabled.
PAGE 89
SNMP Trap Numbers 751 Event ID — 2145 Description Controller battery low. Severity Warning / Non-critical Cause and Action Cause: The controller battery charge is low. Related Alert Information Clear Alert Number: None Action: Recondition the battery. See the online help for more information. Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2146 Description Bad block replacement error.
PAGE 90
SNMP Trap Numbers 753 Event ID — 2148 Description Bad block medium error. Severity Warning / Non-critical Cause and Action Cause: A portion of a physical disk is damaged. Related Alert Information Clear Alert Number: None Action: See the Server Administrator Storage Management online help for more information. Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2149 Description Bad block extended sense error.
PAGE 91
SNMP Trap Numbers 753 Event ID — 2151 Description Enclosure asset tag changed Severity OK / Normal / Informational Cause and Action Cause: A user has changed the enclosure asset tag. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2152 Description Enclosure asset name changed.
PAGE 92
SNMP Trap Numbers 851 Event ID — 2154 Description Maximum temperature probe warning threshold value changed. Severity OK / Normal / Informational Cause and Action Cause: A user has changed the value for the maximum temperature probe warning threshold. This alert is for informational purposes.
PAGE 93
SNMP Trap Numbers 751 Event ID — 2157 Description Controller configuration has been reset. Severity OK / Normal / Informational Cause and Action Cause: A user has reset the controller configuration. See the online help for more information. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2158 Description Physical disk online.
PAGE 94
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2160 Description Dedicated hot spare assigned. Severity OK / Normal / Informational Cause and Action Cause: A user has assigned a physical disk as a dedicated hot spare to a virtual disk. This alert is provided for informational purposes.
PAGE 95
Event ID — 2162 Description Communication regained. Severity OK / Normal / Informational Cause and Action Cause: Communication with an enclosure has been restored. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2162 is a clear alert for alerts 2137 and 2292. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2163 Description Rebuild completed with errors.
PAGE 96
Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2165 Description The RAID controller firmware and driver validation was not performed. The configuration file cannot be opened. Severity Warning / Non-critical Cause and Action Cause: Storage Management is unable to determine whether the system has the minimum required versions of the RAID controller firmware and drivers. This situation may occur for a variety of reasons.
PAGE 97
Severity Warning / Non-critical Cause and Action Cause: The version of the kernel and the driver do not meet the minimum requirements. Storage Management may not be able to display the storage or perform storage management functions until you have updated the system to meet the minimum requirements. Action: See the Readme file for a list of validated kernel and driver versions. Update the system to meet the minimum requirements and then reinstall Storage Management.
PAGE 98
SNMP Trap Numbers 1154 Event ID — 2170 Description The controller battery charge level is normal. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2171 Description The controller battery temperature is above normal.
PAGE 99
SNMP Trap Numbers 1151 Event ID — 2173 Description Unsupported configuration detected. The SCSI rates of the enclosure management modules (EMMs) are not the same. EMM 0 % 1 EMM 1 % 2 Severity Warning / Non-critical Cause and Action Action: Replace one of the EMMs with the matching SCSI rate EMM. Related Alert Information Cause: An unsupported configuration was detected.
PAGE 100
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2176 Description The controller battery Learn cycle has started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 101
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2179 Description The controller battery Learn cycle has been postponed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 102
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2182 Description An invalid SAS configuration has been detected. Severity Critical / Failure / Error Cause and Action Cause: The controller and attached enclosures are not cabled correctly. Related Alert Information Clear Alert Number: None Action: See the hardware documentation for information on correct cabling configurations.
PAGE 103
Related Alert Information Clear Alert Number: None Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2185 Description Physical disk Replace Member Operation stopped for spare. Severity Warning / Non-critical Cause and Action Cause: This alert is provided for informational purposes.
PAGE 104
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2188 Description The controller write policy has been changed to Write Through. Severity Warning Cause and Action Cause: The controller battery is unable to maintain cached data for the required period of time. For example, if the required period of time is 24 hours, the battery is unable to maintain cached data for 24 hours.
PAGE 105
Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2191 Description Multiple enclosures are attached to the controller. This is an unsupported configuration. Severity Critical / Failure / Error Cause and Action Cause: There are too many enclosures attached to the controller port.
PAGE 106
Event ID — 2193 Description The virtual disk reconfiguration has resumed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2194 Description The virtual disk Read policy has changed.
PAGE 107
Event ID — 2196 Description Dedicated hot spare unassigned. Physical disk % 1 Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2197 Description Physical disk Replace Member Operation stopped for rebuild.
PAGE 108
Event ID — 2199 Description The virtual disk cache policy has changed. Severity Informational Cause and Action Cause: User has provided invalid input for the chosen operation. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2200 Description Replace Member Operation not possible as SAS/SATA is not supported in the same virtual disk.
PAGE 109
SNMP Trap Numbers 903 Event ID — 2202 Description A global hot spare has been removed. Severity OK / Normal / Informational Cause and Action Cause: The controller is unable to communicate with a disk that is assigned as a global hot spare. The disk may have been removed. There may also be a bad or loose cable. Action: Check if the disk is healthy and that it has not been removed. Check the cables. If necessary, replace the disk and reassign the hot spare.
PAGE 110
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2205 Description A dedicated hot spare has been automatically unassigned. Severity OK / Normal / Informational Cause and Action Cause: The hot spare is no longer required because the virtual disk it was assigned to has been deleted.
PAGE 111
Cause and Action Cause: The only physical disk available to be assigned as a hot spare is using SAS technology. The physical disks in the virtual disk are using SATA technology. Because of this difference in technology, the hot spare cannot rebuild data if one of the physical disks in the virtual disk fails. Action: Add a SATA disk that is large enough to be used as the hot spare and assign the new disk as a hot spare.
PAGE 112
Event ID — 2212 Description The controller battery temperature is above normal. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2213 Description Recharge count maximum exceeded.
PAGE 113
Event ID — 2215 Description Battery charge process interrupted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2216 Description The battery learn mode has changed to auto. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 114
Event ID — 2218 Description None of the Controller Property are set. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: You should change at least one controller property and run the command again.
PAGE 115
Event ID — 2221 Description Auto Replace Member Operation on Predictive Failure, Abort CC on Error and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again.
PAGE 116
Event ID — 2224 Description Replace Member Operation and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2225 Description Abort Check Consistency on Error and Load balance changed.
PAGE 117
Event ID — 2227 Description Abort Check Consistency on Error, Replace Member Operation and Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again.
PAGE 118
Event ID — 2230 Description Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again.
PAGE 119
Event ID — 2233 Description The Background initialization (BGI) rate has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2234 Description The Patrol Read rate has changed.
PAGE 120
Event ID — 2236 Description Replace Member Operation modified. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: Change at least one controller property and run the command again. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2237 Description Abort Check Consistency on Error modified.
PAGE 121
Event ID — 2239 Description A foreign configuration has been cleared. Severity OK / Normal / Informational Cause and Action Cause: The user has attempted to clear a foreign configuration. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2240 Description A foreign configuration has been imported.
PAGE 122
Event ID — 2242 Description The Patrol Read operation has started. Severity OK / Normal / Informational Cause and Action Cause: The controller has started the Patrol Read operation. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2243 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2243 Description The Patrol Read operation has stopped.
PAGE 123
Event ID — 2245 Description A virtual disk blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2246 Description Warning / Non-critical Severity OK / Normal / Informational Cause and Action Cause: The temperature of the battery is high.
PAGE 124
Event ID — 2248 Description The controller battery is executing a Learn cycle. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2249 Description The physical disk Clear operation has started.
PAGE 125
Event ID — 2251 Description The physical disk blink has initiated. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2252 Description The physical disk blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 126
Event ID — 2254 Description The Clear operation has cancelled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2255 Description The physical disk has been started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 127
Event ID — 2258 Description Controller has preserved cache. Severity Warning /Non-critical Cause and Action Cause: I/O interrupted for a virtual disk which is connected to the controller. Related Alert Information Clear Alert Number: None Action: Check for foreign configuration and import if any. Check for cable fault. Recover any virtual disk lost by the controller.
PAGE 128
Event ID — 2261 Description A global rescan has initiated. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2262 Description SMART thermal shutdown is enabled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 129
Event ID — 2264 Description A device is missing. Severity Warning / Non-critical Cause and Action Cause: The controller cannot communicate with a device. The device may be removed. There may also be a bad or loose cable. Action: Check if the device is in and not removed. If it is in, check the cables. Also check the connection to the controller battery and the battery health. A battery with a weak or depleted charge may cause this alert.
PAGE 130
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751, 801, 851, 901, 951, 1001, 1051, 1101, 1151, 1201 Event ID — 2267 Description The controller reconstruct rate has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 131
Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2270 Description The physical disk Clear operation failed.
PAGE 132
Event ID — 2272 Description Patrol Read found an uncorrectable media error. Severity Critical / Failure / Error Cause and Action Cause: The Patrol Read task has encountered an error that cannot be corrected. There may be a bad disk block that cannot be remapped. Action: Back up your data. If you are able to back up the data successfully, then fully initialize the disk and then restore from back up.
PAGE 133
SNMP Trap Numbers 901 Event ID — 2276 Description The dedicated hot spare is too small. Severity Warning / Non-critical Cause and Action Cause: The dedicated hot spare is not large enough to protect all virtual disks that reside on the disk group. Action: Assign a larger disk as the dedicated hot spare.
PAGE 134
Related Alert Information Clear Alert Number: None Related Alert Number: 2199 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1153 Event ID — 2279 Description The controller battery charge level is operating within normal limits. Severity OK / Normal / Informational Cause and Action Cause: This alert indicates that the battery is recharging during the battery Learn cycle. This alert is provided for informational purposes.
PAGE 135
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2127 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2282 Description Hot spare SMART polling failed. Severity Critical / Failure / Error Cause and Action Cause: The controller firmware attempted a SMART polling on the hot spare but was unable to complete it. The controller has lost communication with the hot spare. Action: Check the health of the disk assigned as a hot spare.
PAGE 136
Event ID — 2284 Description A redundant path has been restored. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: Alert 2284 is a clear alert for alert 2283. Action: None Related Alert Number: None Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 901 Event ID — 2285 Description A disk media error was corrected during recovery.
PAGE 137
Event ID — 2287 Description Protection policy has been changed. Severity OK / Normal / Informational Cause and Action Cause: A new protection policy has been created / existing protection policy has been modified. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2384 Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2288 Description The patrol read has resumed.
PAGE 138
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2290 Description Single-bit ECC error on controller DIMM. Severity Warning / Non-critical Cause and Action Cause: An error involving a single bit has been encountered during a read or write operation. The error correction algorithm has corrected this error.
PAGE 139
Related Alert Information Clear Alert Number: 2162 Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2293 Description The EMM has failed. Severity Critical / Failure / Error Cause and Action Cause: The failure may be caused by a loss of power to the EMM. The EMM self test may also have identified a failure. There could also be a firmware problem or a multi-bit error. Action: Replace the EMM.
PAGE 140
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2296 Description An EMM has been inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 141
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 853 Event ID — 2299 Description Bad PHY %1 Severity Critical / Failure / Error Cause and Action Cause: There is a problem with a physical connection or PHY. The %1 indicates a substitution variable. The text for this substitution variable is displayed with the alert in the alert log and can vary depending on the situation. Action: Contact your technical support.
PAGE 142
Severity Cause and Action Related Alert Information Critical / Failure / Error Cause: The enclosure or an enclosure component is in a Failed or Degraded state. Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See the hardware documentation for more information. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2302 Description The enclosure is not responding.
PAGE 143
Event ID — 2304 Description An attempt to hot plug an EMM has been detected. This type of hot plug is not supported. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: 2211 Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2305 Description The physical disk is too small to be used for a rebuild.
PAGE 144
Related Alert Information Clear Alert Number: None Related Alert Number: 2307 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2307 Description Bad block table is full. Unable to log block %1. Severity Critical / Failure / Error Cause and Action Cause: The bad block table is used for remapping bad disk blocks. This table fills, as bad disk blocks are remapped. When the table is full, bad disk blocks can no longer be remapped and disk errors can no longer be corrected.
PAGE 145
Severity Critical / Failure / Error Cause and Action Cause: A redundant virtual disk has lost redundancy. This may occur when the virtual disk suffers the failure of multiple physical disks. In this case, both the source physical disk and the target disk with redundant data have failed. A rebuild is not possible because there is no redundancy. Action: Replace the failed disks and restore from backup.
PAGE 146
Event Id — 2313 Description A power supply in the enclosure has a DC failure. Severity Warning / Non-critical Cause and Action Cause: The power supply has a DC failure. Related Alert Information Clear Alert Number: 2323 Action: Replace the power supply. Related Alert Number: 2122, 2333 Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 1003 Event ID — 2314 Description The initialization sequence of SAS components failed during system startup.
PAGE 147
SNMP Trap Numbers 751 Event ID — 2316 Description Diagnostic message %1 Severity Critical / Failure / Error Cause and Action Cause: A diagnostics test failed. The %1 indicates a substitution variable. The text for this substitution variable is generated by the utility that ran the diagnostics and is displayed with the alert in the alert log. This text can vary depending on the situation.
PAGE 148
Related Alert Information Clear Alert Number: 753 Related Alert Number: 2320 Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event Id — 2320 Description Single-bit ECC error. The DIMM is critically degraded. Severity Critical / Failure / Error Cause and Action Cause: The DIMM is malfunctioning. Data loss or data corruption may be imminent. Action: Replace the DIMM immediately to avoid data loss or data corruption. The DIMM is a part of the controller battery pack.
PAGE 149
Severity Informational Cause and Action Cause: The power supply unit is switched off. Either a user switched off the power supply unit or it is defective. Action: Check if the power switch is turned off. If it is turned off, turn it on. If the problem persists, check if the power cord is attached and functional. If the problem is still not corrected or if the power switch is already turned on, replace the power supply unit.
PAGE 150
Event ID — 2325 Description The power supply cable has been inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Status: Alert 2325 is a clear alert for alerts 2324 and 2312. Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1001 Event ID — 2326 Description A foreign configuration has been detected.
PAGE 151
Related Alert Information Clear Alert Number: None Related Alert Number: 2266 Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2328 Description The NVRAM has corrupt data. Severity Warning / Non-critical Cause and Action Cause: The NVRAM has corrupt data. The controller is unable to correct the situation. Action: Replace the controller.
PAGE 152
Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text can vary depending on the situation. This alert is for informational purposes.
PAGE 153
Event ID — 2334 Description Controller event log: %1 Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text is from events in the controller event log that were generated while Storage Management was not running. This text can vary depending on the situation. This alert is for informational purposes.
PAGE 154
Storage Management was not running. This text can vary depending on the situation. Action: See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2337 Description The controller is unable to recover cached data from the battery backup unit (BBU).
PAGE 155
Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2340 Description The BGI completed with uncorrectable errors. Severity Critical / Failure / Error Cause and Action Cause: The BGI task encountered errors that cannot be corrected.
PAGE 156
Event ID — 2342 Description The Check Consistency found inconsistent parity data. Data redundancy may be lost. Severity Warning / Non-critical Cause and Action Cause: The data on a source disk and the redundant data on a target disk is inconsistent. Action: Restart the Check Consistency task. If you receive this alert again, check the health of the physical disks included in the virtual disk. Review the alert messages for significant alerts related to the physical disks.
PAGE 157
SNMP Trap Numbers 1203 Event ID — 2345 Description The virtual disk initialization failed. Severity Critical / Failure / Error Cause and Action Cause: The controller cannot communicate with attached devices. A disk may be removed or contain errors. Cables may also be loose or defective. Action: Verify the health of attached devices. Review the Alert Log for significant events. Make sure the cables are attached securely.
PAGE 158
Cause and Action Hardware RAID: Cause and Action Cause: You are attempting to rebuild data that resides on a defective disk. Action: Replace the source disk and restore from backup. Software RAID: Related Alert Information • Perform a backup with the Verify option. • If the file backup fails, try to restore the failed file from a previous backup. • When the backup with the Verify option is complete without any errors, delete the Virtual Disk. • Recreate a new Virtual Disk with new drives.
PAGE 159
Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2350 Description There was an unrecoverable disk media error during the rebuild or recovery operation. Severity Critical / Failure / Error Cause and Action Cause: The rebuild or recovery operation encountered an unrecoverable disk media error. Action: Replace the disk.
PAGE 160
SNMP Trap Numbers 901 Event ID — 2353 Description The enclosure temperature has returned to normal. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Status: Alert 2353 is a clear alert for alerts 2100 and 2101. Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1051 Event ID — 2354 Description Enclosure firmware download in progress.
PAGE 161
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 853 Event ID — 2356 Description SAS SMP Communications error %1. Severity Critical / Failure / Error Cause and Action Cause: The text for this alert is generated by the firmware and can vary depending on the situation. The reference to SMP in this text refers to SAS Management Protocol. Action: There may be a SAS topology error.
PAGE 162
SNMP Trap Numbers 754 Event ID — 2358 Description The battery charge cycle is complete. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2359 Description Disk found is not supplied by an authorized hardware provider.
PAGE 163
Event ID — 2361 Description Physical disk(s) that are part of a virtual disk have been removed while the system was shut down. This removal was discovered during system start-up. Severity Warning Cause and Action Cause: This alert is for informational purposes. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2362 Description Physical disk(s) have been removed from a virtual disk.
PAGE 164
Event ID — 2366 Description Dedicated spare imported as global due to missing arrays. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
PAGE 165
SNMP Trap Numbers 851 Event ID — 2369 Description Virtual Disk Redundancy has been degraded. Severity OK / Normal / Informational Cause and Action Cause: A physical disk in a RAID 6 virtual disk has either failed or been removed. Related Alert Information Clear Alert Number: 2121 Action: Replace the missing or failed physical disk.
PAGE 166
Event ID — 2372 Description Attempted import of Virtual Disk exceeding the limit supported on the controller. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2373 Description Attempted import of unsupported Virtual Disk type RAID %1.
PAGE 167
Event ID — 2375 Description Attempted import of Virtual Disk with missing physical disk. Severity OK / Normal / Informational Cause and Action Cause: User is attempting to import a foreign virtual disk with a missing physical disk. This alert is provided for informational purposes. Action: None.
PAGE 168
Event ID — 2378 Description Attempted import of an incompatible physical drive. Severity OK / Normal / Informational Cause and Action Cause: User is attempting to import an incompatible physical drive. This alert is provided for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2379 Description An overflow of the foreign configuration has occurred.
PAGE 169
Event ID — 2381 Description Controller preserved cache is recovered. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2382 Description An unsupported configuration was detected.
PAGE 170
SNMP Trap Numbers 1201 Event ID — 2384 Description The Warning level set for the hot spare protection policy is violated for the Virtual Disk. Severity Warning / Non-critical Cause and Action Cause: The number of physical disks you specified for the hot spare protection policy is violated. Action: Reassign the number of hot spares as specified in the protection policy for that RAID level.
PAGE 171
Related Alert Information Clear Alert Number: 2195 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2387 Description A virtual disk bad block medium error is detected. Severity Critical / Failure / Error Cause and Action Cause: Virtual disk bad blocks are due to presence of unrecoverable bad blocks on one or more member physical disks. Action: 1. Perform a backup of the virtual disk with the Verify option selected.
PAGE 172
SNMP Trap Numbers 751 Event ID — 2389 Description The virtual disk bad block medium error is cleared. Severity OK / Normal / Informational Cause and Action Action: None. Related Alert Information Cause: Virtual disk bad blocks are cleared. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2390 Description The Instant Encrypt Erase operation is performed on the physical disk.
PAGE 173
Event ID — 2393 Description The virtual disk is encrypted. Severity OK / Normal / Informational Cause and Action Cause: The Encrypted virtual disk operation on normal virtual disk (created using Self encrypting disks only) is successful. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2394 Description Persistent Hot Spare is enabled.
PAGE 174
Event ID — 2396 Description The Check Consistency detected uncorrectable multiple medium errors. Severity Critical / Failure / Error Cause and Action Cause: The Check Consistency task detects uncorrectable multiple errors. Related Alert Information Clear Alert Number: None Action: Replace the failed physical disk. You can identify the failed disk by locating the disk that has a red “X” for its status. Rebuild the physical disk. When finished, restart the check consistency operation.
PAGE 175
SNMP Trap Numbers 751 Event ID — 2399 Description The Physical Disk Power status changed from 1% to 2%. Severity OK / Normal / Informational Cause and Action Cause: The physical disk power status is changed from one state to another. A physical disk can have the following power statuses: spun down, transition, and spun up. Action: None.
PAGE 176
SNMP Trap Numbers 754 Event ID — 2402 Description Changing the Physical Disk Power status from 1% to 2% failed. Severity Failure / Error Cause and Action Cause: When changing the Physical Disk Power status fails. Related Alert Information Clear Alert Number: None Action: Replace the physical disk. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2403 Description Virtual Disk is available.
PAGE 177
SNMP Trap Numbers 1201 Event ID — 2405 Description Command timeout on physical disk. Severity Warning Cause and Action Cause: The spundown physical disks take more time than the timeout period and the configuration commands are timed out. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2407 Description Controller Encryption mode is enabled in LKM.
PAGE 178
Event ID — 2412 Description Controller CacheCade is resized. Severity Informational Cause and Action Cause: This alert is provided for informational purposes. Related Alert Information Clear Alert Number: None Action: None. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2413 Description Controller CacheCade is created. Severity Informational Cause and Action Cause: This alert is provided for informational purposes.
PAGE 179
Event ID — 2415 Description Controller battery is discharging. Severity Informational Cause and Action Cause: The battery learn cycle has started. Related Alert Information Clear Alert Number: None Action: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2416 Description Disk medium error detected. Severity Warning / Non-critical Cause and Action Cause: A part of the physical disk is damaged.
PAGE 180
NOTE: If the unrecoverable medium error has not been corrected, it may be reported again by the system. This error can be fixed by writing data on the affected area or deleting and recreating the Virtual Disk as demonstrated in the following procedure. Related Alert Information 1. Back up the data. 2. Delete the Virtual Disk. 3. Recreate the Virtual Disk using the same parameters like size, RAID level, disks, etc. 4. Restore data.
PAGE 181
Event ID — 2426 Description State change on Physical disk from Non- RAID to READY. Severity Informational Cause and Action Cause: User triggered action. Related Alert Information Clear Alert Number: None Action: Configure the drive to be ready using CLI/GUI. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2429 Description Drive Prepared for Removal. Severity Informational Cause and Action Cause: User triggered action.
PAGE 182
Event ID — 2431 Description Physical Device Full Initialization completed. Severity Informational Cause and Action Cause: User triggered task. Related Alert Information Action: None. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2432 Description The PCIeSSD device was found to be in security locked state. Full initialization has to be done on the security locked drive to recover the drive in usable state.
PAGE 183
Event ID — 2434 Description Physical Device has reached or exceeded its warranted device wear-out limit. Severity Warning Cause and Action Cause: User triggered task. Related Alert Information Action: None. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2435 Description Physical Device is approaching read-only mode. Severity Informational Cause and Action Cause: User triggered task.
PAGE 184
Event ID — 2437 Description The physical device blink has initiated. Severity Informational Cause and Action Cause: User triggered task. Related Alert Information Action: None. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2438 Description The physical device blink has ceased. Severity Informational Cause and Action Cause: User triggered task. Related Alert Information Clear Alert Number: None Action: None.
PAGE 185
Event ID — 2441 Description The PCIe solid state device identified in the message has turned off because the critical temperature threshold of the device was exceeded. Severity Error Cause and Action Cause: None Related Alert Information Action: Contact your service provider. Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2442 Description The reliability of the PCIe solid state device identified in the message degraded.
PAGE 186
SNMP Trap Numbers 904 Event ID — 2444 Description The Patrol Read operation was manually stopped before completion. Severity Informational Cause and Action Cause: User Triggered Task Related Alert Information Clear Alert Number: None Action: If desired, restart the Patrol Read operation at a later time.
PAGE 187
. Event ID — 2700 Description The following journal mirror is available. %1 Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2701 Description The following journal mirror is being replaced.(wwn ) %1 : FluidCache. Severity Information Cause and Action No action required.
PAGE 188
Event ID — 2703 Description There are not enough journal mirrors available to operate. : FluidCache. Severity Error Cause and Action To resolve the issue, you must ensure that there are at least two journal mirrors that are accessible. You must activate either one or more failed cache devices or use the fldc_restore utility to rebuild the node.
PAGE 189
Event ID — 2874 Description The following Cache Device has no associated server in the configuration: %1 : FluidCache. Severity Warning Cause and Action There is a cache device specified in the configuration with no associated cache server configured. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2875 Description The following Disk is beginning flushing.(wwn) %1 (path) %2 : FluidCache.
PAGE 190
Event ID — 2900 Description The following cache device has failed. (wwn) %1 (path) %2 : FluidCache. Severity Error Cause and Action Replace the failed device. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2901 Description The following storage device is either inaccessible or failed. (wwn) %1 (path) %2 : FluidCache.
PAGE 191
Event ID — 2903 Description The following cache device has been registered. (ww n) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2904 Description The following cache device has been removed. (wwn ) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
PAGE 192
Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201, 1501 Event ID — 2907 Description Caching has been enabled on the following storage device. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
PAGE 193
Cause and Action Service is required. Contact Dell Technical Support. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1203, 1503 Event ID — 2910 Description Caching has been disabled for the following storage device. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
PAGE 194
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2913 Description The following failed cache device has completed recovery. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
PAGE 195
SNMP Trap Numbers 1604 Event ID — 2916 Description Running on an evaluation license. Days remaining %1 (days): FluidCache. Severity Information Cause and Action A permanent license should be purchased. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2917 Description Running on an expired evaluation license. No configuration changes will be allowed. Expired days: % 1: FluidCache.
PAGE 196
Event ID — 2919 Description Running on an expired/invalid license. Configuration changes are disabled.: FluidCache. Severity Error Cause and Action A valid permanent license must be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2920 Description A license has been installed.: FluidCache. Severity Information Cause and Action No action required.
PAGE 197
Event ID — 2922 Description Not enough memory to run necessary services.: FluidCache. Severity Error Cause and Action You must run on a system with adequate memory. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2923 Description One or more cache devices are missing. Cache is hung.: FluidCache. Severity Error Cause and Action To resolve the issue, insert the missing cache device.
PAGE 198
Event ID — 2930 Description Even though caching was enabled in write-back mode, it is currently operating in write-through mode.: FluidCache. Severity Warning Cause and Action To resolve the issue, add a PCIe SSD to the cache pool.
PAGE 199
Event ID — 2933 Description Caching is no longer degraded to pass-through mode and is now operating in its configured mode.: FluidCache. Severity Warning Cause and Action No action required.
PAGE 200
PAGE 201
System Event Log Messages for IPMI Systems 4 The tables in this chapter list the system event log (SEL) messages, their severity, and cause. NOTE: For corrective actions, see the appropriate documentation. Temperature Sensor Events The temperature sensor event messages help protect critical components by alerting the systems management console when the temperature rises inside the chassis.
PAGE 202
Event Message Severity Cause The temperature is less than the lower critical threshold. Critical Temperature of the backplane, system board, system inlet, or the carrier in the specified system entered into critical state. The temperature is greater than the upper warning threshold.
PAGE 203
Event Message Severity Cause voltage sensor detected a warning . Warning Voltage of the monitored entity exceeded the warning threshold. voltage sensor returned to normal . Information The voltage of a previously reported is returned to normal state. The voltage is less than the lower warning threshold.
PAGE 204
Event Message Severity Cause Fan sensor returned to normal state . Information The fan specified by has returned to its normal operating speed. Fan sensor detected a warning . Warning The speed of the specified fan may not be sufficient to provide enough cooling to the system. Fan Redundancy sensor redundancy degraded.
PAGE 205
Event Message Severity Cause Fan RPM is within range. Information The speed of the specified fan is operating in a normal range. Fan is removed. Critical A required fan was removed. Fan was inserted. Information A fan was added. Fan is present. Information The total number of fans present. Fan is absent. Critical A required fan is missing. The fans are redundant.
PAGE 206
Event Message Severity Cause status processor sensor disabled. Warning This event is generated for all processors that are disabled. status processor sensor terminator not present. Information This event is generated if the terminator is missing on an empty processor slot. presence was deasserted. Critical This event is generated when the system could not detect the processor. presence was asserted.
PAGE 207
Event Message Severity Cause CPU terminator is absent. Warning This event is generated if the terminator is missing on an empty processor slot. CPU is throttled. Warning This event is generated when the processor slows down to prevent overheating. CPU is absent. Critical This event is generated when the system could not detect the processor. CPU is operating correctly. Information This event is generated when the processor recovered from an error.
PAGE 208
Event Message Severity Cause predictive failure was asserted. Critical This event is generated when the power supply is about to fail. input lost was asserted. Critical This event is generated when the power supply is unplugged. predictive failure was deasserted. Information This event is generated when the power supply has recovered from an earlier predictive failure event.
PAGE 209
Event Message Severity Cause PS 1 Status: Power supply sensor for PS 1, configuration error was asserted. Warning/Critical This event is generated when an invalid power supply configuration is detected. PS 1 Status: Power supply sensor for PS 1, configuration error was deasserted. Information This event is generated when the power supply has recovered from an earlier invalid configuration. Power supply is present. Information This event is generated when the power supply is plugged in.
PAGE 210
Event Message Severity Cause The temperature for power supply is outside of range. Critical Temperature of specified power supply entered into critical state. An under voltage fault detected on power supply . Critical The specified power supply detected inefficient voltage. An over voltage fault detected on power supply . Critical The specified power supply detected an over voltage condition. An over current fault detected on power supply .
PAGE 211
Memory ECC Events The memory ECC event messages monitor the memory modules in a system. These messages monitor the ECC memory correction rate and the type of memory events that occurred. Table 10. Memory ECC Events Event Message Severity Cause ECC error correction detected on Bank # DIMM [A/B]. Information This event is generated when there is a memory error correction on a particular Dual Inline Memory Module (DIMM). ECC uncorrectable error detected on Bank # [DIMM].
PAGE 212
BMC Watchdog Events Enter a short description for your reference topic. This should be one or two sentences that describes the topic content. Table 11. BMC Watchdog Events Event Message Severity Cause BMC OS Watchdog timer expired. Information This event is generated when the BMC watchdog timer expires and no action is set. BMC OS Watchdog performed system reboot.
PAGE 213
Event Message Severity Cause was received from Host) and the action is set to power off. The OS watchdog timer expired. Critical This event is generated when the BMC watchdog timer expires and no action is set. Memory Events The memory modules can be configured in different ways in particular systems. These messages monitor the status, warning, and configuration information about the memory modules in the system. Table 12. Memory Events Event Message Severity Cause Memory RAID redundancy degraded.
PAGE 214
Event Message Severity Cause Memory Spared redundancy regained. Information This event is generated when the redundancy lost or degraded earlier is regained in a spared memory configuration. Memory RAID is redundant. Information This event is generated when the memory redundancy mode has change to RAID redundant. Memory RAID redundancy is lost. Check memory device at location(s) . Critical This event is generated when redundancy is lost in a RAIDconfigured memory configuration.
PAGE 215
Hardware Log Sensor Events The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full. Table 13. Hardware Log Sensor Events Event Message Severity Cause Log full detected. Critical This event is generated when the SEL device detects that only one entry can be added to the SEL before it is full. Log cleared.
PAGE 216
Event Message Severity Cause Drive consistency check in progress was deasserted. Information This event is generated when the consistency check of the drive is completed. Drive in critical array was asserted. Critical This event is generated when the drive is placed in critical array. Drive in critical array was deasserted. Information This event is generated when the drive is removed from critical array. Drive in failed array was asserted.
PAGE 217
Event Message Severity Cause sensor intrusion was asserted while system was ON. Critical This event is generated when the intrusion sensor detects an intrusion while the system is on. sensor intrusion was asserted while system was OFF. Critical This event is generated when the intrusion sensor detects an intrusion while the system is off. The chassis is open. Critical This event is generated when the intrusion sensor detects an intrusion.
PAGE 218
Event Message Severity Cause System Event PCI System Err. Information This event indicates historical data, and is generated when the system has crashed and recovered. System Event PCI Fatal Err. Critical This error is generated when a fatal error is detected on the PCI bus. System Event PCIE Fatal Err. Critical This error is generated when a fatal error is detected on the PCIE bus. POST Err. Critical This event is generated when an error occurs during system boot.
PAGE 219
Event Message Severity Cause Memory Removed (BANK# DIMM#) presence was asserted. Information This event is generated when memory is removed from the system. Memory Cfg Err configuration error (BANK# DIMM#) was asserted. Critical This event is generated when memory configuration is incorrect for the system. Mem Redun Gain redundancy regained. Information This event is generated when memory redundancy is regained. Mem ECC Warning transition to noncritical from OK.
PAGE 220
Event Message Severity Cause SBE Log Disabled correctable memory error logging disabled was asserted. Critical This event is generated when the ECC single bit error rate is exceeded. CPU Protocol Err transition to nonrecoverable. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU Bus PERR transition to non-recoverable. Critical This event is generated when the processor bus PERR enters a non-recoverable state.
PAGE 221
Event Message Severity Cause An I/O channel check error was detected. Critical This event is generated when a critical interrupt is generated in the I/O Channel. A PCI parity error was detected on a component at bus device function . Critical This event is generated when a parity error is detected on the PCI bus. A PCI parity error was detected on a component at slot . Critical This event is generated when a parity error is detected on the PCI bus.
PAGE 222
Event Message Severity Cause A fatal error was detected on a component at slot . Critical This error is generated when a fatal error is detected on the PCI bus. A fatal IO error detected on a component at bus device function . Critical This error is generated when a fatal IO error is detected. A fatal IO error detected on a component at slot . Critical This error is generated when a fatal IO error is detected.
PAGE 223
Event Message Severity Cause An OEM diagnostic event occurred. Information This event is generated when an OEM event occurs. OEM events can be used by the service team to better understand the cause of the failure. CPU protocol error detected. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU bus parity error detected. Critical This event is generated when the processor bus PERR enters a non-recoverable state.
PAGE 224
Event Message Severity Cause Device option ROM on mezzanine card failed to support Link Tuning or FlexAddress. Critical This event is generated when the PCI device option ROM for a NIC does not support link tuning or the Flex addressing feature. Failed to program virtual MAC address on a component at bus device function . Critical This event is generated when BIOS fails to program virtual MAC address on the given NIC device.
PAGE 225
Fatal Error Code Description Cause 85 DMA controller failure. This error code indicates DMA controller failure. 86 Interrupt controller failure. This error code indicates interrupt controller failure. 87 Timer refresh failure. This error code indicates timer refresh failure. 88 Programmable interval timer error. This error code indicates a programmable interval timer error. 89 Parity error. This error code indicates a parity error. 8A SIO failure. This error code indicates SIO failure.
PAGE 226
Operating System Generated System Events Table 18. Operating System Generated System Events Description Severity Cause System Event: OS stop event OS graceful shutdown detected Information The operating system was shutdown/restarted normally. OEM Event data record (after OS graceful shutdown/restart event) Information Comment string accompanying an operating system shutdown/ restart.
PAGE 227
Description Severity Cause not connected or is incorrectly connected. connected or is improperly connected. Information This event is generated when named cable or interconnect earlier cable or interconnect connection error was corrected. Description Severity Cause Failed was asserted Critical This event is generated when the sensor detects a failed or missing battery.
PAGE 228
Power And Performance Events The power and performance events are used to detect degradation in system performance with change in power supply. Table 21. Power And Performance Events Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, degraded, was deasserted Normal This event is generated when system performance was restored.
PAGE 229
Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was asserted Critical This event is generated when a change in power supply degrades system performance. System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was deasserted Normal This event is generated when system performance was restored. The system performance degraded.
PAGE 230
Entity Presence Events The entity presence messages are used for detecting different hardware devices. Table 22. Entity Presence Events Description Severity Cause presence was asserted Information This event is generated when the device was detected. absent was asserted Critical This event is generated when the device was not detected. The is present. Information This event is generated when the device was detected. The is absent.
PAGE 231
Description Severity Cause Hdwar version err: Version Change sensor, hardware incompatibility (BMC firmware and CPU mismatch) was asserted Critical This event is generated when the CPU and firmware are not compatible. Link Tuning: Version Change sensor, successful software or F/W change was deasserted Warning This event is generated when the link tuning setting for proper NIC operation fails to update.
PAGE 232
Description Severity Cause The QuickPath Interconnect (QPI) width degraded. Warning This event is generated when the bus is not operating at maximum speed or width. The QuickPath Interconnect (QPI) width regained. Information This event is generated when the bus is operating at maximum speed or width. BIOS detected an error configuring the Intel Trusted Execution Technology (TXT). Critical This event is generated when TXT initialization failed.