Command Line Interface Guide

Omconfig Preferences Messages
Use the omconfig preferences messages command to select the format of alert messages. The default
format is traditional, which is the legacy format.
The following table lists the parameters you can use with this command.
Table 36. Valid Parameters Of Configuring Preferences Messages
name=value pair 1 name=value pair 2 Description
attribute=format setting=traditional |
enhanced
traditional: Sets the alert message to traditional
format.
enhanced: Sets the alert message to Enhanced
Event Messaging format. This is similar to the format
available in iDRAC7.
For example, to set the message format to traditional use the following command:
omconfig preferences messages format=traditional
Omconfig Preferences Useraccess
Depending on the policies of your organization, you may want to restrict the access that some user levels
have to Server Administrator. The omconfig preferences useraccess command allows you to grant or
withhold the right of users and power users to access Server Administrator.
The following table displays the valid parameters for the command:
Table 37. Enabling User Access For Administrators, Power Users, And Users
Command Result Description
omconfig preferences
useraccess enable=user
Grants Server Administrator
access to Users, Power Users,
and Administrators.
Least restrictive form of user
access.
omconfig preferences
useraccess enable=poweruser
Grants Server Administrator
access to Power Users and
Administrators.
Excludes user level access only.
omconfig preferences
useraccess enable=admin
Grants Server Administrator
access to Administrators only.
Most restrictive form of user
access.
Omconfig Preferences Webserver
Use the omconfig preferences webserver command to set the encryption levels of the Server
Administrator Web server, configure the URL launch point in the Server Administrator Web server
environment, and to set the JRE version for the Server Administrator.
The following table displays the name=value pairs you can use with this command:
Table 38. Valid Parameters Of Omconfig Preferences Webserver
name=value pair 1 name=value pair 2 Description
attribute=sslencryption setting=autonegotiate |
128bitorhigher
autonegotiate: Sets the
encryption levels automatically
based on your Web browser
settings.
102