Command Line Interface Guide

7
Omreport Storage Commands
The omreport command allows you to view storage component information for disks, controllers,
enclosures, batteries, global storage properties, connectors and cachecades that are part of the storage
system. The omreport command helps to get reports with the level of detail that you want.
The commands may vary in, whether they define the fields that appear in the results of a particular
omreport command. Fields are defined only if they have a special or less familiar use.
The following sections provide the omreport command syntax required to display the information of
various storage components.
To see a list of valid commands for omreport storage, type:
omreport storage -?
The following table provides the omreport storage command syntax.
Table 64. Omreport Storage Help
Command
Level 1
Command
Level 2
Command
Level 3
Use
omreport storage Displays a list of storage components for which
omreport commands are available.
pdisk Displays a list of the omreport storage pdisk
parameters for displaying physical disk information.
vdisk Displays a list of omreport storage vdisk parameters for
displaying virtual disk information.
controller Displays a list of the omreport storage controller
parameters for displaying controller information.
enclosure Displays a list of the omreport storage enclosure
parameters for displaying enclosure information.
battery Displays a list of the omreport storage battery
parameters for displaying battery information.
globalinfo Displays a list of the omreport storage globalinfo
parameters for displaying global storage property
information.
connector Displays a list of the omreport storage connector
parameters for displaying connector information.
cachecade Displays a list of the omreport storage cachecade
parameters for displaying cachecade properties.
pciessed Displays the properties of the PCIe SSD subsystem.
fluidcache Displays the fluid cache properties and the associated
fluid cache disks.
133