Command Line Interface Guide

Omconfig Rescan Controller
Description Rescans a controller. For more information, see the Dell OpenManage Online
Help .
Syntax omconfig storage controller action=rescan controller=id, where
id is the controller ID as reported by the omreport storage controller command.
Example to Rescan controller 1.
Example
omconfig storage controller action=rescan controller=1
NOTE: The rescan controller is not supported on non-RAID SCSI and SAS
controllers. Reboot the system to make the configuration changes visible
on non-RAID SCSI controllers.
Omconfig Enable Controller Alarm
Description Enables the controller alarm. For more information, see the Dell OpenManage
Online Help .
Syntax omconfig storage controller action=enablealarm controller=id,
where id is the controller ID as reported by the omreport storage controller
command.
Example to Enable the alarm on controller 1.
Example
omconfig storage controller action=enablealarm controller=1
Omconfig Disable Controller Alarm
Description Disables the controller alarm. For more information, see the Dell OpenManage
Online Help .
Syntax omconfig storage controller action=enablealarm controller=id,
where id is the controller ID as reported by the omreport storage controller
command.
Example to Disable the alarm on controller 1.
Example
omconfig storage controller action=disablealarm controller=1
Omconfig Quiet Controller Alarm
Table 89. omconfig Quiet Controller Alarm
Description Silences an activated controller alarm. For more information, see the Dell
OpenManage Online Help.
Syntax omconfig storage controller action=quietalarm controller=id,
where id is the controller ID as reported by the omreport storage controller
command.
Example to Quiet the alarm on controller 1.
Example
omconfig storage controller action=quietalarm controller=1
165