Command Line Interface Guide

NOTE: If you set escrow=yes, specify the escrow file path.
Omconfig Change Encryption Key
Descriptio
n
Changes the encryption key for the controller, if passphrase is provided.
Syntax
omconfig storage controller action= changesecuritykey controller=id
keyid=<keyid string> passphrase=passphrase string> oldpassphrase=<old
passphrase string>[escrow=yes] [filepath=<Absolute path to the escrow
file>]>
Example
to
Change the encryption key for the controller.
Example
omconfig storage controller action= changesecuritykey controller=1
keyid=Dell_123 passphrase=Dell_123 oldpassphrase=Dell_321 escrow= yes
filepath=C:/escrow.xml
NOTE: If you set escrow=yes, specify the escrow file path.
Omconfig Delete Encryption Key
Descriptio
n
Deletes the encryption key for the controller.
Syntax omconfig storage controller action= deletesecuritykey controller=id,
where id is the controller ID as reported by the omreport storage controller command.
Example
to
Change the encryption key for the controller.
Example
omconfig storage controller action= deletesecuritykey controller=1
Omconfig Set Background Initialization Rate
Descriptio
n
Sets the background initialization rate.
Syntax
omconfig storage controller action=setbgirate controller=id rate=<0
to 100>, where id is the controller ID as reported by the omreport storage controller
command.
Example
to
Sets the background initialization rate to 50 on controller 1.
Example
omconfig storage controller action=setbgirate controller=1 rate=50
Omconfig Set Reconstruct Rate
Descriptio
n
Sets the reconstruct rate.
Syntax
omconfig storage controller action= setreconstructrate controller=id
rate=<0 to 100>, where id is the controller ID as reported by the omreport storage
controller command.
175