Command Line Interface Guide

NOTE: This command is not supported on SAS controllers.
Syntax
omconfig storage connector action=rescan controller=id
connector=id, where id is the controller ID and the connector ID as reported
by the omreport command. To obtain these values, type omreport storage
controller
to display the controller IDs and then type omreport storage
connector controller=ID to display the IDs for the connectors attached to
the controller.
Example to Rescan connector 2 on controller 1.
Example
omconfig storage connector action=rescan controller=1
connector=2
Omconfig Cachecade Commands
The following table displays the omconfig command syntax required to execute cachecade tasks.
Table 120. omconfig Cachecade Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
cachecade
action=blink controller=id cachecade=id
action=unblink controller=id cachecade=id
action=deletecachecade controller=id cachecade=id [force=yes]
action=resize controller=id cachecade=id pdisk= <PDISKID>
action=rename controller=id cachecade=id name=<string>
Omconfig Blink Cachecade
Description Blinks the physical disks included in a cachecade.
Syntax
omconfig storage cachecade action=blink controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported
by the omreport command. To obtain these values, type omreport storage
controller
to display the controller IDs and then type omreport storage
cachecade controller=ID to display the IDs for the cachecades of the
controller.
Example to Blinks the physical disk in cachecade 4 on controller 1
Example
omconfig storage cachecade action=blink controller=1
cachecade=4
Omconfig Unblink Cachecade
Description Unblinks the physical disks included in a cachecade.
Syntax
omconfig storage cachecade action=unblink controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported
by the omreport command. To obtain these values, type omreport storage
controller
to display the controller IDs and then type omreport storage
cachecade controller=ID to display the IDs for the cachecades of the
controller.
187