Command Line Interface Guide

• BIOS Version

• Release Date

Firmware

• Name

• Version

Network Data

The following details are listed for each NIC and Team interface, if Team interface is configured in the

system:

• IP Address

• Subnet Mask

• Default Gateway

• MAC Address

Storage Enclosures

The following details are listed for each storage enclosure attached to the system:

• Name

• Service Tag

Omreport System Thrmshutdown Or Omreport Servermodule

Thrmshutdown

Use the omreport system thrmshutdown or omreport servermodule thrmshutdown command to view

the properties configured for a thermal shutdown action.

The three properties that display for thermal shutdown are disabled, warning, or failure. If the CLI

displays the following message, the thermal shutdown feature has been disabled:

Thermal protect shutdown severity: disabled

If the system is configured to shutdown when a temperature probe detects a warning or failure event,

one of the following messages is displayed:

Thermal protect shutdown severity: warning

Thermal protect shutdown severity: failure

Omreport System Version Or Omreport Servermodule Version

Use the omreport system version or omreport servermodule version command to list the version

numbers of the BIOS, firmware, systems management software, and operating system installed on the

system. Type:

omreport system version

omreport servermodule version

NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is

installed, Server Administrator displays the USC version.