Command Line Interface Guide

Comman
d Level 1
Command
Level 2
Command
Level 3
User
Privilege
Required
Use
alertlog P, A Allows the administrator to clear the alert log.
assetinfo P, A Enters and edits cost of ownership information
for the system, including values for
depreciation, lease, maintenance, service, and
support.
cmdlog P, A Allows the administrator to clear the command
log.
esmlog P, A Allows the administrator to clear the ESM log.
events P, A Enables or disables SNMP traps.
pedestinations P, A Sets IP addresses for alert destinations.
platformevent
s
A Determines the shutdown action, if any, taken
for a specific platform event. Also, enables or
disables platform events filter alert generation.
recovery P, A Determines in advance how the system
responds to a hung operating system.
shutdown A Allows the administrator to select from several
options when shutting down the system.
thrmshutdow
n
A Sets the severity level at which a thermal event
triggers a system shutdown.
webserver A Starts or stops the Web server.
chassis or
mainsystem
biossetup A Configures the behavior of specific system
components controlled by the BIOS.
fans P, A
Configures fan probe warning thresholds to the
default or a specific value.
NOTE: You cannot change threshold values
on embedded server management (ESM3)
and Dell PowerEdge x8xx systems.
frontpanel A Configures the Power button, Non-Masking
Interrupt (NMI) button, encryption access, and
LCD display of the system.
info P, A Allows you to set an initial value, or to edit the
value of the asset tag or chassis name.
leds P, A Specifies when to flash a chassis fault LED or
chassis identification LED, and allows you to
clear the LED for the system's hard drive.
memorymode A Enables or disables the spare bank, mirroring,
raid, and Double Device Data Correction
63