Reference Guide
名称=值对 1 属性= 名称=值对 2 设置= 说明
• ata: 将板载 SATA 控制器设置为
ATA 模式。
• raid: 将板载 SATA 控制器设置
为 RAID 模式。
attribute=sataport (0...7) 或 (a...h)
setting=off | auto
• off: 禁用 SATA 端口。
• auto: 自动启用 SATA 端口。
attribute=secondaryscsi setting=on | off
• on: 启用次要 SCSI。
• off: 禁用此设备。
attribute=serialportaddr setting=default | alternate | com1
| com2
• default: 映射为串行设备
1=COM1,串行设备
2=COM2。
• alternate: 映射为串行设备
1=COM2,串行设备 2=COM1
• com1: 将串行端口地址设置为
COM1。
• com2: 将串行端口地址设置为
COM2。
attribute=serialcom setting=off | on | com1 | com2 |
onwithconsole
• off: 禁用串行通信设置。
• on: 启用串行通信设置,不进行
控制台重定向。
• com1: 启用串行通信设置,通
过 COM1 进行控制台重定向。
• com2: 启用串行通信设置,通
过 COM2 进行控制台重定向。
• onwithconsole: 启用串行通信
设置
,通过 COM1 和 COM2
进行控制台重定向。
注: 设置 onwithconsole
仅在 DELL 刀片系统上受
支持。
attribute=serialport1 setting=off | auto | com1 | com3 |
bmcserial | bmcnic | rac |
com1bmc
• off: 禁用串行端口 1。
• auto: 将串行端口 1 映射到
COM 端口。
• com1: 将串行端口 1 映射到
COM 端口 1。
• com3: 将串行端口 1 映射到
COM 端口 3。
• bmcserial: 将串行端口 1 映射
到 BMC 串行。
• bmcnic: 将串行端口 1 映射到
底板管理控制器
(BMC) NIC。
• rac: 将串行端口 1 映射到远程
访问控制器 (RAC)。
• com1bmc: 将串行端口 1 映射
到 COM 端口 1 bmc。
71