Reference Guide

Omreport Enclosure Status
The following sections provide the omreport storage enclosure command syntax required to execute the
enclosure commands. The following table describes the syntax for the omreport Enclosure commands.
Table 68. Omreport Enclosure Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
enclosure
Displays property information for all
enclosures attached to the system.
controller=id, where id is the controller
number
Displays all enclosures connected to
the controller.
controller=id
enclosure=<ENCLOSUREID>, where id
is the controller number and
<ENCLOSUREID>is the enclosure ID.
Example for SCSI controllers:
controller=0 enclosure=2. Example for
SAS controllers: controller=0
enclosure=1:2.
Displays the specified enclosure and its
components.
Omreport Temperature Probe Status
The following table describes the syntax for the omreport Probe commands
Table 69. Omreport Temperature Probe Commands
Required Command Levels (1, 2,
3) and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the
system.
controller=id
enclosure=<ENCLOSUREID>
info=temps where id is the
controller number and
<ENCLOSUREID> is the enclosure
ID. Example for SCSI controllers:
controller=0 enclosure=2
info=temps. Example for SAS
controllers: controller=0
enclosure=1:2 info=temps
Displays the temperature probes
for the specified enclosure.
controller=id
enclosure=<ENCLOSUREID>
info=temps index=n where id is
the controller number and
<ENCLOSUREID> is the enclosure
Displays the temperature probes
for the specified enclosure.
137