Reference Guide

Example
omconfig storage pdisk
action=cancelreplacemember controller=0
pdisk=0:0:1
Omconfig Clear Physical Disk
Description
Clears data or a configuration from a physical disk.
Syntax
omconfig storage pdisk action=clear
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Clear physical disk 3 on connector 0 of controller
1. On a SAS controller, the physical disk resides in
enclosure 2.
Example for SAS controllers
omconfig storage pdisk action=clear
controller=1 pdisk=0:2:3
Omconfig Cancel Clear Physical Disk
Description
Cancels a clear operation in progress on a physical
disk.
Syntax
omconfig storage pdisk
action=cancelclear controller=id
pdisk=<PDISKID>, where id is the controller ID.
The <PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Cancel the clear of physical disk 3 on connector 0
of controller 1. On a SAS controller, the physical
disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=cancelclear controller=1
pdisk=0:2:3
152