Reference Guide

The symbol |, often called pipe, is the logical exclusive or operator. For example, enable | disable means
you can enable or disable the component or feature, but you cannot simultaneously enable and disable
the component or feature.
Command Summary Of The omreport Command
Depending on the system configuration, the results of the omreport command vary from one system to
another. Data displays for installed components only.
NOTE: When a system includes an external chassis, the displayed results vary by operating system.
On SUSE Linux Enterprise Server and Red Hat Enterprise Linux systems, the omreport commands
display external chassis information in a separate section after the main chassis information. On
Microsoft Windows systems, data about the external chassis does not appear in the omreport
output.
The following table provides a high-level summary of the omreport command. The column titled
Command level 1 displays the omreport command at its most general use. Command level 2 shows the
major objects or components that you can view using omreport (about, chassis, storage, and system).
Command level 3 lists the specific objects and components to view reports. User privilege required refers
to the type of privilege you need to run the command, where U = User, P = Power User, and A =
Administrator. Use is a very general statement about the actions performed using omreport.
The following table lists the omreport commands available for about, system, and main system chassis.
Table 4. Command Level 1, Level 2, And Level 3 For omreport
Command
Level 1
Command Level
2
Command
Level 3
User
Privilege
Required
Use
omreport modularenclosu
re
U, P, A Displays the information for all the
modular chassis.
about U, P, A Displays the version number and
properties for Server Administrator.
details=true U, P, A Displays the information for all the Server
Administrator programs installed.
chassis or
mainsystem
U, P, A Displays the general status of all the main
components.
acswitch U, P, A Displays the failover settings where
redundant AC power lines are supported in
a system.
batteries U, P, A Displays the properties set for batteries.
bios U, P, A Displays the BIOS information such as
manufacturer, version, and release date.
biossetup A Displays the BIOS setup properties
configured during system boot.
fans U, P, A Displays the status and thresholds for
system fans.
19