Reference Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=nic4 setting=enabled |
enabledwithpxe | disabled |
enabledonly | enablednonepxe |
enabledwithiscsi
• enabled: Enables the fourth
NIC during system boot.
• enabledwithpxe: Enables the
fourth NIC during system
boot (with PXE on if the
system has PXE).
• disabled: Disables the fourth
NIC during system boot.
• enabledonly: Enables the
fourth NIC during system
boot (with PXE off if the
system has PXE).
• enablednonepxe: Enables the
fourth NIC during system
boot (with PXE off if the
system has PXE).
• enabledwithiscsi: Enables the
fourth NIC during system
boot (with iSCSI on if the
system has iSCSI).
attribute=numlock setting=on | off
• on: Uses the keypad as
number keys.
• off: Uses the keypad as arrow
keys.
attribute=NodeInterleave
NOTE: Use
NodeInterleave instead
of numa as numa will be
deprecated in future
releases.
setting=enabled | disabled
• enabled: Enables Node
Interleaving and disables Non-
Uniform Memory Access.
• disabled: Disables Node
Interleaving and enables Non-
Uniform Memory Access.
attribute=ppaddress setting=off | lpt1 | lpt2 | lpt3
• off: Disables the parallel port
address.
• lpt1: Locates the device on
LPT1.
• lpt2: Locates the device on
LPT2.
• lpt3: Locates the device on
LPT3.
attribute=ppmode setting=at | ps2 | ecp | epp
• at: Sets the parallel port mode
to AT.
• ps2: Sets the parallel port
mode to PS/2.
• ecp: Sets the parallel port
mode to ECP (extended
capabilities port).
• epp: Sets the parallel port
mode to EPP (enhanced
parallel port).
73