Reference Guide

Group name=value pair 1 attribute= name=value pair 2 setting=

attribute=TpmSecurity setting=Off | OnPbm | OnNoPbm

UEFI Boot

Settings

attribute=UefiBootSeq sequence=aliasname1, aliasname2,..... aliasnameN

Omconfig Chassis Currents Or Omconfig Mainsystem Currents

NOTE: This command is no longer available through Server Administrator.

Omconfig Chassis Fans Or Omconfig Mainsystem Fans

Use the omconfig chassis fans or omconfig mainsystem fans command to set fan probe warning

thresholds. As with other components, you can view both warning and failure threshold values, but you

cannot set failure thresholds. The system manufacturer sets the minimum and maximum failure

thresholds.

Valid Parameters For Fan Warning Thresholds

The following table shows the valid parameters for setting fan warning thresholds:

Table 23. omconfig chassis fans or omconfig chassis fans

name=value pair Description

index= <n> Number of the probe or probe index (must

specify).

warnthresh=default Sets minimum and maximum warning thresholds

to default.

minwarnthresh=<n> Minimum warning threshold.

maxwarnthresh=<n> Maximum warning threshold.

Default Minimum And Maximum Warning Thresholds

NOTE: Systems that contain ESM3, ESM4, and BMC capabilities do not allow you to set warning

threshold values to default values.

To set both the upper and lower fan warning threshold values to the recommended default value, type:

omconfig chassis fans index=0 warnthresh=default

omconfig mainsystem fans index=0 warnthresh=default

You cannot default one value and set another. In other words, if you default the minimum warning

threshold value, you are also selecting the default value for the maximum warning threshold value.

Specifying A Value For Minimum And Maximum Warning Thresholds

If you prefer to specify values for the fan probe warning thresholds, you must specify the number of the

probe you are configuring and the minimum and/or maximum warning threshold values. In the following