Reference Guide

name=value pair 1
config=
name=value pair 2 Description
NOTE: Baud rates of 19200, 38400, and
57600 are supported on PowerEdge 9G
systems.
115200: Sets the volatile and non-volatile
connection speed to 115200 bits per second.
NOTE: Baud rate of 115200 is supported
on certain systems that have a DRAC 5
installed.
NOTE: Baud rate of 19200, 57600, and
115200 are supported on 10G systems that
have iDRAC installed.
flowcontrol=none | rtscts
none: No control over the flow of
communication through the serial port.
rtscts: RTS is ready to send and CTS is clear to
send.
mode=directbasic |
directterminal |
directbasicterminal |
modembasic | modemterminal |
modembasicterminal
directbasic: Type of messaging used for IPMI
messaging over a serial connection.
directterminal: Type of messaging that uses
printable ASCII characters and allows a limited
number of text commands over a serial
connection.
directbasicterminal: Both basic and terminal
mode messaging over a serial connection.
modembasic: Type of messaging used for IPMI
messaging over a modem.
modemterminal: Type of messaging that uses
printable ASCII characters and allows a limited
number of text commands over a modem.
modembasicterminal: Both basic and terminal
messaging over a modem.
NOTE: All commands may not be
supported on the system.
privilegelevel=administrator |
operator | user
administrator: Sets the maximum privilege
level that are accepted on a serial connection,
to Administrator.
operator: Sets the maximum privilege level
that are accepted on a serial connection, to
Operator.
user: Sets the maximum privilege level that are
accepted on a serial connection, to User.
96