SNMP Reference Guide

Physical Memory Array Table
The physical memory array is the entire physical memory of a system. The example that follows shows
variable values for a system that has one 128-megabyte (MB) dual in-line memory module (DIMM):
• physicalMemoryArrayMaximumSize = 2,097,152 kilobytes (KB) or 2 gigabytes (GB)
• physicalMemoryArrayTotalNumberSockets = 4 (the example system has four DIMM slots on the
motherboard)
• physicalMemoryArrayInUseNumberSockets = 1 (there is only one DIMM installed)
The Rank of the DIMM are :
• 0 — Unknown
• 1 — Single
• 2 — Dual
• 4 — Quad
• 8 — Octal
• 16 — Hexa
The following object sets up the Physical Memory Array Table:
Table 931. Physical Memory Array Table
Name
physicalMemoryArrayTable
Object ID 1.3.6.1.4.1.674.10892.1.1300.10
Description Defines the Physical Memory Array Table.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible
Table 932. Physical Memory Array Table Entry
Name
physicalMemoryArrayTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.1300.10.1
Description Defines the Physical Memory Array Table entry.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible
Index
physicalMemoryArraychassisIndex
,
physicalMemoryArrayIndex
Table 933. Physical Memory Array Chassis Index
Name
physicalMemoryArraychassisIndex
Object ID 1.3.6.1.4.1.674.10892.1.1300.10.1.1
Description Defines the index (one-based) of this chassis.
255