SNMP Reference Guide

Table 1344. Cluster Name
Name
clusterName
Object ID 1.3.6.1.4.1.674.10892.1.1800.10.1.8
Description Defines the name of the cluster.
Syntax DellString
Access Read-only
Cluster Group Variable Values
This section includes definitions for Server Administrator-specific variable values used in this section.
Table 1345. Cluster Type
Variable Name:DellClusterType
Data Type:Integer
Possible Data
Values
Meaning of Data Value
unknown(1)
The cluster type is unknown.
highAvailabili
tyCluster(2)
The cluster type is a high-availability cluster.
Baseboard Management Controller Group
The Baseboard Management Controller (BMC) monitors the system for critical events by communicating
with various sensors on the system board and sends alerts and log events when certain parameters
exceed their preset thresholds. The BMC Group provides information about the BMC that may be present
in your system. In addition to providing general information about the BMC, this group provides
information about the serial and local area network (LAN) interfaces of the BMC.
Baseboard Management Controller Group Tables
The objects in the BMC group define information about the BMC and the serial and LAN interfaces that
can be used to access the BMC remotely to perform management activities. Objects for the serial
interface define the serial connection mode, flow control type and bit rate. Objects for the LAN interface
define the media access control (MAC) address, internet protocol (IP) address, subnet mask and default
gateway.
The following MIB tables define the BMC group:
• Baseboard Management Controller Table
• Baseboard Management Controller Serial Interface Table
• Baseboard Management Controller LAN Interface Table
Baseboard Management Controller Table
Table 1346. BMC Table
Name
bmcTable
Object ID 1.3.6.1.4.1.674.10892.1.1900.10
Description Defines the Baseboard Management Controller Table.
354