SNMP Reference Guide

directPPP(16)
BMC serial interface supports
Direct PPP mode.
directTerminal(32)
BMC serial interface supports
Direct Terminal mode.
Table 1391. BMC Serial Connection Mode Settings
Variable
Name:DellBMCSerialConnectionModeSettingsDellBMCSeria
lConnectionModeCapabilities
Data Type:Integer
These values are bit masks; therefore, combination values are
possible.
Possible Data Values Meaning of Data Value
-- none(0)
No modes enabled.
modemBasic(1)
Modem Basic mode is enabled.
modemPPP(2)
Modem PPP mode is enabled.
modemTerminal(4)
Modem Terminal mode is
enabled.
directBasic(8)
Direct Basic mode is enabled.
directPPP(16)
Direct PPP mode is enabled.
directTerminal(32)
Direct Terminal mode is enabled.
Table 1392. BMC Serial Flow Control Type
Variable Name:DellBMCSerialFlowControlType
Data Type:Integer
Possible Data Values Meaning of Data Value
-- none(0)
No flow control used.
rtscts(1)
RTS/CTS (hardware) flow control
used.
xonXoff(2)
XON/XOFF flow control used.
Table 1393. BMC Serial Bit Rate Type
Variable Name:DellBMCSerialBitRateType
Data Type:Integer
Possible Data Values Meaning of Data Value
bps9600(6)
Bit rate is 9600 bps (bits per
second)
bps19200(7)
Bit rate is 19200 bps
bps38400(8)
Bit rate is 38400 bps
bps57600(9)
Bit rate is 57600 bps
bps115200(10)
Bit rate is 115200 bps
364