SNMP Reference Guide

iDRAC7 MIB

The Integrated Dell Remote Access Controller (iDRAC) MIB (filename iDRAC-SMIv1.mib/ iDRAC-

SMIv2.mib) is the MIB supported by the Integrated Dell Remote Access Controller 7 (iDRAC7). This MIB

provides management data that allows you to monitor devices and software on a system via an out-of-

band connection to the iDRAC7 of a system.

NOTE: iDRAC7 firmware release r1.30.30 or later, the iDRAC7 MIB file is published in both types of

SMI (Structure of Managed Information) notations: SMIv1 and SMIv2. The SMIv1 copy of the iDRAC7

MIB file is named iDRAC-SMIv1.mib. And the SMIv2 copy is named iDRAC-SMIv2.mib. Prior to

iDRAC7 firmware release r1.30.30, only a SMIv1 copy was published. And the file name of the SMIv1

copy was iDRAC-MIB.txt

Supported Systems

The iDRAC7 MIB is supported on the following systems:

Blade Servers

• PowerEdge M420

• PowerEdge M520

• PowerEdge M620

• PowerEdge M820

Rack and Tower Servers

• PowerEdge R320

• PowerEdge R420

• PowerEdge R520

• PowerEdge R620

• PowerEdge R720

• PowerEdge R720XD

• PowerEdge R820

• PowerEdge T320

• PowerEdge T420

• PowerEdge T620

iDRAC7 Supported SNMP Versions

The following table identifies the SNMP versions that support iDRAC7 for the given SNMP operations.

527