User's Manual

Property Definition
• Failed — The connector has encountered a failure
and is no longer functioning.
Connector Type Displays whether the connector is operating in RAID
mode. The connector is always a SAS connector.
Related Links
Path Health
Path Health
The path health of the connectors is represented as normal, warning, or critical. The possible values are
displayed as Available, Degraded, or Failed.
If the enclosure health is displayed as degraded and further investigation shows all enclosure
components (EMMs, Fans, Physical Disks, Power Supplies, and Temperature) to be in normal condition,
select the Information/Configuration subtab of the enclosure to view details of the Path Failure.
Related Links
Setting The Redundant Path Configuration
Logical Connector Properties And Tasks
Clearing The Connectors Redundant Path View
If you do not want the redundant path view, physically disconnect the connector port from the enclosure
and reboot the system. After the system reboots, the user interface still displays the logical connector, but
in a critical state. To clear the redundant path mode, select Clear Redundant Path view from the
Controller Tasks.
Selecting this option clears the redundant path view and the connectors are represented on the user
interface as Connector 0 and Connector 1.
Related Links
Setting The Redundant Path Configuration
Connector Components
For information on attached components, see Enclosure And Backplane Properties And Tasks.
123